manualshive.com logo in svg

LG 55LV75D, Owner'S Manual, Page: 2 / 30

Share
Download
LG 55LV75D Owner'S Manual Download Page 2

ENGLISH

2

TABLE OF CONTENTS

SAFETY PRECAUTIONS ................3

 -Precautions In Installing the Product .....................3
 -Precautions to the AC Adapter and Electrical 

Power ......................................................................................5

 -Precautions In Moving the Product ........................7
 -Precautions In Using the Product ............................8
 -Mounting on a Wall .........................................................9

LICENSES .................................... 10

ASSEMBLY AND PREPARATION 11

 -Parts and Buttons .........................................................12
 -Portrait Layout ................................................................13
 -Remove L-brackets before Installation ..............13
 -Storage Method for Panel Protection ................14
 -Installing on a Wall ........................................................16
 -EXTERNAL EQUIPMENT SETUP ...........................17
 -Tiling Displays ..................................................................17

REMOTE CONTROL .................... 19

MAKING CONNECTIONS ........... 21

 -Connecting to a PC.......................................................21
 -External Device Connection .....................................21
 -Using the Input List ......................................................21
 -Daisy Chain Monitors ..................................................23

TROUBLESHOOTING .................. 24

PRODUCT SPECIFICATIONS ...... 27

Summary of Contents for 55LV75D































Reviews:

No comments