LG 55LV640S, Easy Setup Manual

Page: 21 / 81

13
ENGLISH
Supported Video Formats
Extension Codec
.asf, .wmv
Video
VC-1 Advanced Profile (Except
for WMVA), VC-1 Simple and
Main Profiles
Audio WMA Standard (Except for
WMA v1/ WMA Speech)
.avi
Video
Xvid (Except for 3 warp-point
GMC), H.264/AVC, Motion
Jpeg, MPEG-4
Audio
MPEG-1 Layer I, MPEG-1 Layer
II, MPEG-1 Layer III (MP3),
Dolby Digital, LPCM, ADPCM,
DTS
.mp4,
.m4v,
.mov
Video H.264/AVC, MPEG-4, HEVC
Audio
Dolby Digital, Dolby Digital
Plus, AAC, MPEG-1 Layer III
(MP3)
.3gp, .3g2
Video H.264/AVC, MPEG-4
Audio AAC, AMR-NB, AMR-WB
.mkv
Video MPEG-2, MPEG-4, H.264/AVC,
VP8, VP9, HEVC
Audio
Dolby Digital, Dolby Digital
Plus, AAC, PCM, DTS, MPEG-1
Layer I, MPEG-1 Layer II, MPEG-
1 Layer III (MP3)
.ts, .trp,
.tp, .mts
Video H.264/AVC, MPEG-2, HEVC
Audio
MPEG-1 Layer I, MPEG-1 Layer
II, MPEG-1 Layer III (MP3),
Dolby Digital, Dolby Digital
Plus, AAC, PCM
.mpg,
.mpeg,
.dat
Video MPEG-1, MPEG-2
Audio MPEG-1 Layer I, MPEG-1 Layer
II, MPEG-1 Layer III (MP3)
.vob
Video MPEG-1, MPEG-2
Audio Dolby Digital, MPEG-1 Layer I,
MPEG-1 Layer II, DVD-LPCM
Regulatory
WARNING!
Never place a television set in an unstable
location. A television set may fall, causing serious
personal injury or death. Many injuries, particularly
to children, can be avoided by taking simple
precautions such as:
• Using cabinets or stands recommended by the
manufacturer of the television set.
• Only using furniture that can safely support the
television set.
• Ensuring the television set is not overhanging
the edge of the supporting furniture.
• Not placing the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television
set to a suitable support.
• Not placing the television set on cloth or other
materials that may be located between the
television set and supporting furniture.
• Educating children about the dangers of
climbing on furniture to reach the television set
or its controls.
If your existing television set is being retained
and relocated, the same considerations as above
should be applied.
Symbols
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
Refers to stand-by.
Refers to “ON” (power).
Refers to dangerous voltage.