LG 55LV640S, Installation Manual

Page: 12 / 36

12 INSTALLATION MENU
ENGLISH
GENERAL
Configuration Setup
Select RCU
-
It is a mode to set whether to use Select RCU or not. When ‘Select RCU’ is set to ‘Enable’, You can adjust ‘Number of RCU’
menu.
Number of RCU
-
It is a mode to set Number of RCU.
Number of RCU value range 1~9. (When ‘Select RCU’ is set to ‘Enable’)
Number of RCU value range 0. (When ‘Select RCU’ is set to ‘Disable’)
* RCU(Remote Control Unit) : It is special RCU that operates only setted number of RCU in TV.
One Channel Map
-
If ‘One Channel Map’ is ‘Enable’, the TV will operate as below.
•
• A. When the TV is auto-scanning, it searches air, cable and satellite channels.
•
• B. User can assign a channel number him/herself by manual scan.
•
• C. In 'Programme Edit’ window, all channels are shown in a single list regardless of input source.
•
• D. Automatically scanned channels may not have the user-desired channel numbers.
-
If user change the ‘Enable/Disable’ value, an pop-up window will be displayed to warn that all channel
information will be deleted. The Default value is ‘Enable’.
DTV Programme Update
-
It is a mode to set whether to update DTV programme automatically or not.
When DTV Programme Update is set to ’Auto’, the function to update TV’s programme map according to dtv programme’s
stream information.
DTV Programme Update is set to ‘Manual’, the function to keep TV’s programme map even though DTV programme’s
information is changed.