LG 55ET961H0TA.AAU, Manual, Page: 24 / 50

8
ENGLISH
_Inde
x
• If the cable that connects the panel to the Companion Box
(AV box) is to be embedded in the wall, it is recommended
to make use of a conduit as shown in the figure below.
The conduit must be installed in accordance with the
wall-embedded installment regulations of each country. It
is recommended that a product made of metallic material
with internal dimensions at least 70 mm wide and 20 mm
thick be used.
Companion Box
(AV box)
Cable
Panel
Conduit
Wall
Connections
Connect various external devices to the TV and switch input modes to
select an external device. For more information of external device’s
connection, refer to the manual provided with each device.
Antenna/Cable
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
• Use a signal splitter to use more than 2 TVs.
• If the image quality is poor, install a signal amplifier properly to
improve the image quality.
• If the image quality is poor with an antenna connected, try to realign
the antenna in the correct direction.
• An antenna cable and converter are not supplied.
• For a location that is not supported with ULTRA HD broadcasting, this
TV cannot receive ULTRA HD broadcasts directly.
Satellite dish
Connect the TV to a satellite dish to a satellite socket with a satellite RF
cable (75 Ω). (Depending on model)
CI module
View the encrypted (pay) services in digital TV mode. (Depending on
model)
• Check if the CI module is inserted into the PCMCIA card slot in the
right direction. If the module is not inserted properly, this can cause
damage to the TV and the PCMCIA card slot.
• If the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service
Operator.