ENGLISH
ASSEMBLING AND PREPARING
26
4
Stand cover
y
Insert the protruding parts of the
Stand Cover into the holes.
CAUTION
5
Cover holder
Stand
cover
y
Insert the Cover Holder of the
Stand Cover into the holes until it
clicks.
CAUTION
y
Remove the stand before installing
the TV on a wall mount by
performing the stand attachment
in reverse.
NOTE
y
When attaching the stand to the
TV set, place the screen facing
down on a cushioned table or flat
surface to protect the screen from
scratches.
y
Make sure that the screws are
inserted correctly and fastened
securely. (If they are not fastened
securely enough, the TV may tilt
forward after being installed.)
Do not use too much force and
over tighten the screws; otherwise
screw may be damaged and not
tighten correctly.
CAUTION
Mounting on a table
1 Lift and tilt the TV into its upright
position on a table.
- Leave a 10 cm (minimum)
space from the wall for proper
ventilation.
10 cm
10 cm
10 cm
10 cm
5 cm
10 cm
2 Connect the power cord to a wall
outlet.
