ENGLISH
28
MAGIC REMOTE CONTROL FUNCTIONS
MAGIC REMOTE CONTROL FUNCTIONS
When the message “Magic remote control battery is low. Change the battery.” is displayed, replace the battery.
To install batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside
the compartment, and close the battery cover. Failure to match the correct polarities of the battery may cause the
battery to burst or leak, resulting in fire, personal injury, or ambient pollution. Be sure to point the remote control at
the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.
y
Do not mix old and new batteries, as this may damage the remote control.
CAUTION
This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.
VOL
CH
Accesses the quick menu.
Accesses the Universal Control.
(Depending on country)
Wheel (OK)
Selects menus or options and confirms
your input.
Scrolls through the saved programmes.
If you press the navigation button while
moving the pointer on the screen,
the pointer disappears, and the Magic
Remote Control works as a regular
remote control.
To display the pointer again, shake the
Magic Remote Control from side to
side.
(POWER)
Turns the TV on or off.
Used for viewing 3D video.
BACK
Returns to the previous level.
CH
Scrolls through the saved
channels.
Navigation buttons
(up/down/left/right)
Scrolls through menus or options.
(MUTE)
Mutes all sounds.
VOL
Adjusts the volume level.
Voice recognition
-This is a beta version and only available
in selected functions for supported
models.
-Network connection is required to use
the voice recognition function.
1. Press the Voice recognition button.
2. Speak slowly and precisely.
When a voice is recognized, the
processing message appears on the
screen.
• Use the magic remote control no
further than 10 cm from your face.
SMART
Accesses the Smart Home.
Pointer (RF transmitter)
(LIGHTING ON/OFF)
Turns the light on and off.
If you set it to ON, the light automatically
turns off in 5 seconds
