LG 55EA9809 User Manual Download

Page: 223 / 256

GP4

eng

Problem

Solution

Vibrating horizontal/vertical
lines and fishnet patterns
appear momentarily.

• Such a problem may happen when there is strong

electronic interference. Turn off other electronic devices
such as mobile phones, power tools and other small
electrical appliances.

The screen display freezes
or does not work properly
during a digital broadcast.

• This may occur in case of a weak signal or unstable

reception. Adjust the antenna orientation and cable
connections.

• If the signal strength or quality is low on

Manual Tuning

check with the TV station or administration office.

Digital broadcasting is not
available even though the
cable is connected.

• Check with the cable operator providing your

subscription and/or signal. (Depending on your
subscription, digital broadcasting may not be
supported.)

Summary of Contents for 55EA9809

































































































































































































































































Search results

Summary of Contents for 55EA9809

Reviews:

Related manuals for 55EA9809

Brands by name

Popular brands

LG 55EA9809, User Manual

Search results

Summary of Contents for 55EA9809

Reviews:

Related manuals for 55EA9809

Brands by name

Popular brands