LG 50PG20 Series, Training Manual

Page: 95 / 127

Plasma Spring 2009 50PG20
95
Control Connector P111 to P102 on the Y Control Connector P111 to P102 on the Y - - SUS Slide 1 of 3 Label Explanation SUS Slide 1 of 3 Label Explanation
P111 CONNECTOR LABELS
(19 here is 49 on the connector)
CONNECTOR LABELS (Not Used)
Pin 1 on the Control PWB P111 is pin 50 on
the Y-SUS PWB P102
Roughly 39 pins dedicated to Y-SUS beginning at
pin 23.
Pins 23 through 60 are the Y-SUS drive signals.
There is a ground between each pin.
Actual: Pin 1 through 10 of P160 are not used in this
model. Pins 17 through 21 are +5V .
However, this connector has many more pins than
the Labels show.
Example: The Labels outlined are on the silk
screening.
This is a 60 Pin Connector to the Y-SUS board.
P160 This connector is a little confusing in its
labeling.
FL111 and FL112 5V Fuse
LABELS P160 is a 60 Pin but the 50PG20
uses only 50 Pins P111 but P111 is
covered in Silicone so P160 pins are
used for description below.
50 Pin
60 Pin