manualshive.com logo in svg

LG 49SE3DD, Owner'S Manual

Share
Download
LG 49SE3DD Owner'S Manual Download Page 32

ENGLISH

32

PRODUCT SPECIFICATIONS

The product specifications below may be changed without prior notice due to upgrade of product functions.
“   ” refers to alternating current (AC), and “   ” refers to direct current (DC).

LCD screen

Screen type

Thin Film Transistor (TFT)
Liquid Crystal Display (LCD) Screen

Video signal

Maximum resolution

1920 x 1080 @ 60 Hz

 - This may not be supported on some OS or graphics card 

types.

Recommended resolution

1920 x 1080 @ 60 Hz

 - This may not be supported on some OS or graphics card 

types.

Horizontal frequency

RGB: 30 kHz to 83 kHz
HDMI: 30 kHz to 83 kHz

Vertical frequency

RGB: 50 Hz to 75 Hz
HDMI: 56 Hz to 60 Hz 

Synchronization

Separate Sync/ Digital

Input/ Output ports

SPEAKER OUT, AUDIO IN, HDMI1,HDMI2, LAN, RGB IN, IR IN, RS-232C IN/OUT, USB

Embedded battery

Applied

Environmental 

Conditions

Operating Temperature

0 °C to 40 °C

Operating Humidity

10 % to 80 %

Storage Temperature

-20 °C to 60 °C

Storage Humidity

5 % to 85 %

* 

Applicable only for models that support the speakers

Audio

RMS Audio Output

10 W + 10 W (R + L)

Input Sensitivity

0.7 Vrms

Speaker Impedance

6 Ω

Summary of Contents for 49SE3DD





































Reviews:

No comments

Brands by name

Popular brands

Load more brands