4
ENG
ENGLISH
Installation Menu
Digital Audio Input
y
y
HDMI/OPS/DISPLAYPORT: you can hear the sounds of digital signals carried by HDMI, or OPS or DIS-
PLAYPORT through the monitor speakers.
y
y
Audio In: you can hear sounds through the monitor speaker by connecting HDMI, or OPS or DISPLAY-
PORT ports to the Audio In port.
Speaker
y
y
If you set this option to On, you can hear sounds through the monitor speaker. (* The monitor speaker is
sold separately.)
y
y
If you set this option to Off, you cannot hear sounds through the monitor speaker.
USB Auto Playback
y
y
This is a feature that auto-playbacks photos and videos when a USB device is connected. You can view
photos and videos without manually selecting the View Photos/Movies menu.
y
y
If you select Movie for USB Auto Playback, then the video files in the top level folder on the USB device
will automatically play in sequence. When switched on, Signage automatically searches and plays video
files from a USB.
y
y
If you select Photo for USB Auto Playback, then the image files in the top level folder on the USB de-
vice will automatically play in sequence. When switched on, Signage automatically searches and plays
photos from a USB. However, this feature is unavailable while the SuperSign content is played.
Set ID (1 ~ 1000)
y
y
When several products are connected for display, you can assign a unique Set ID No. to each product.
Assign numbers ranging from 1 to 1000 and exit the option. You can control each product separately by
using the Set ID you assigned to each product.
(Depending on the model, this feature may not be supported.)
Reset Set ID
y
y
You can reset the Set ID of the product to 1.
Standby PWR Control
y
y
Sets the option to keep an EDID value when the monitor is turned off.
y
y
It can be set to On or Off.
y
y
If you set it to On, the EDID value will be kept when the monitor is turned off.
y
y
If you set it to Off, the EDID value will be lost when the monitor is turned off.
y
y
If set to "Off," the EDID value can be stored according to the Input and Model.
(Depending on the model, this feature may not be supported.)
I
nterface Selection
y
y
You can set communication with the connected OPS.
y
y
DISPLAY: Enables communication with external devices via the serial port.
y
y
OPS: Enables communication via the OPS connected to the product.
(Depending on the model, this feature may not be supported.)
OPS Power Control
y
y
You can control the power of the OPS.
y
y
Disable: Disables the OPS Power Control.
y
y
Sync (on): Synchronizes the power status of the monitor and the OPS only when monitor is on.
y
y
Sync (on/off): Always synchronizes the power status of the monitor and the OPS.
(Depending on the model, this feature may not be supported.)