12
ENG
ENGLISH
USING THE MONITOR SET
y
Use a shielded signal interface cable, such
as D-sub 15 pin signal cable and DVI/HDMI
cable, with a ferrite core to maintain standard
compliance for the product.
y
If you want to use HDMI-PC mode, you must
set the input label to PC mode.
y
Connect the signal
input cable and tighten
it by turning the screws
clockwise.
y
If you turn the Monitor set on when the set
becomes cold, the screen may flicker. This
is normal.
y
Some red, green, or blue spots may appear
on the screen. This is normal.
DVI/HDMI connection
Transmits the digital video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the DVI/HDMI cable as shown the
following illustrations.
RGB connection
Transmits the analog video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the D-sub 15 pin cable as shown the
following illustrations.
y
Do not press the screen with your finger for
a long time as this may result in temporary
distortion on the screen.
y
Avoid displaying a fixed image on the
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
Back of the product.
(not included)
(not included)
Back of the product.
PC
PC
NOTE
NOTE
CAUTION
CAUTION