APPENDIX
APPENDIX
122
PC Mode Problems
■
Adjust resolution, horizontal frequency, or vertical frequency.
■
Check the input source.
■
Work the Auto configure or adjust clock, phase, or H/V position. (Option)
■
Check the signal cable.
■
Update video card drivers.
The signal is out of range
Screen color is unstable
or single color
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
Picture OK but No sound
Unusual sound from
inside the product
No sound
when connecting HDMI
or USB
No output from one
of the speakers
Audio Problems
■
Press the VOL or VOLUME button.
■
Sound muted? Press the MUTE button.
■
Try another channel. The problem may be with the broadcast.
■
Are the audio cables installed properly?
■
Adjust Balance in menu option.
■
A change in ambient humidity or temperature may result in an unusual noise
when the product is turned on or off and does not indicate a fault with the
product.
■
Check High Speed HDMI cable.
■
Check USB cable over version 2.0.
■
Use normal MP3 file.
*This feature is not available for all models.
Erratic Operation
Installer menu setup
■
Adjust Installer menu settings as required.
Power
No Power
■
See troubleshooting flow chart.
Software Problems
Cannot direct enter chan-
nel number or “No Signal”
appears
■
After 2-5-5 + MENU, only channels included in TV controller will appear. If chan-
nel is available it can be added to channel scan, rescan channels. If it is not avail-
able, the ‘No Signal’ message appears on the TV screen.
NOTE
!
G
For other problems not caused by the TV, refer to other devices’ operating guides.
Summary of Contents for 47LD650H
Page 75: ...APPENDIX 149 ...
Page 76: ...APPENDIX APPENDIX 150 ...
