LG 43UM6950DUB Service Manual Download Page 29

Page: 29 / 93

B. Power error

Off when on, off while viewing, power auto on/off

Established

date

Revised date

8/16

Error

symptom

Standard Repair Process

* Please refer to the all cases which can be displayed on power off mode.

Power Off list

Explanation

Action contents

KEYTIMEOUT

Power off when TV is not turned off during a certain time

RESULT : micom force to trigger TV power off.

CONDITION : When pressing power key while power on/off status, CPU does not response within 8 seconds

Check & Change Main B/D

1SEC Power OFF

Almost the same as Power Off by KEYTIMEOUT. If there is no vaild communication

Bet ween CPU and MICOM for more than 5 seconds, the MICOM switcheds off PSU and

Records. Power off by 1SEC Power off. In this case, we don’t have information where the

malfunction exactly occurred. But in in indicates that CPU had stopped and rebooted.

Check & Change Main B/D

ACDET

In case of AC Off (It is normal when the power cord is unplugged.)

Normal

If there are many ACDETs connected, Power Board is defective

Check & Change Power B/D

5V MNT

Power off by unstable AC power detect.

RESULT : micom check the stable power.

CONDITION : When AC on or DC on, stabilization check routine (Power Detect High

Check) fail after multi power on.

Check & Change Power B/D

CPUABNORMAL

If the CPU attempts to reset in case of abnormal operation and Shut Down in case of failure.

Check & Change Main B/D

NO POLING

Power off when receiving no ack.

RESULT : TV power off/on (Reboot)

CONDITION : There is no I2C response from CPU for 15 seconds.

Check & Change Main B/D

CPUCMD

Power off by main SoC command.

Check & Change Main B/D

INV_ERROR

Power off by module error (OLED)

CONDITION : OLED Module send signal to micom

Check & Change OLED Module

ONRF_FAIL

RESULT : Reboot, CONDITION : OLED module compensation is running but fails.

Check & Change OLED Module

PNWASHFAIL

Power off by panel noise wash function fail case.

Check & Change OLED Module

RESET

When Micom is reset by AC Off

Normal Case

KEY

Power off by Local key

OFFTIMER

Power off by Off timer

SLEEPTIMER

Power off by sleep timer

NOSIG

Power off by No Signal

FANSTOP

Power off by FAN operation stopped

INSTOP

Power off by Instop Key

AUTO OFF

Power off by auto off function

RESREC

Power off by reserved recording

RECEND

Power off when recording stops

SWDOWN

Reboot by SW down load function

UNKNOWN

No meaning (same as initial value)

COMP_END

OLED threshold voltage degradation(Compensation) completes.

PNWASHDONE

Power off by panel noise wash function complited. (OLED)

Only for training and service purposes.

Summary of Contents for 43UM6950DUB



























































































Search results

Summary of Contents for 43UM6950DUB

Reviews:

Related manuals for 43UM6950DUB

Brands by name

Popular brands

LG 43UM6950DUB, Service Manual

Search results

Summary of Contents for 43UM6950DUB

Reviews:

Related manuals for 43UM6950DUB

Brands by name

Popular brands