11
ENGLISH
NOTE
•
>
> >
General
>
HDMI ULTRA HD Deep Color
:
-
On
: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)
-
Off
: Support 4K @ 50/60 Hz 8bit (4:2:0)
•
If the device connected to Input Port also
supports ULTRA HD Deep Color, your picture
may be clearer. However, if the device doesn’t
support it, it may not work properly. In that case,
connect the device to a different HDMI port or
change the TV’s
HDMI ULTRA HD Deep Color
setting to
Off
.
- This feature is available only on certain models
which support HDMI ULTRA HD Deep Color.
•
HDMI Audio Supported Format:
DTS (44.1 kHz / 48 kHz),
AC3 (32 kHz / 44.1 kHz / 48 kHz),
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
(Depending upon model)
Remote Control
(Depending upon model)
The descriptions in this manual are based on
the buttons on the remote control. Please read
this manual carefully and use the TV correctly. To
install batteries, open the battery cover, replace
batteries (1.5 V AAA) matching the and ends
to the label inside the compartment, and close
the battery cover. Failure to match the correct
polarities of the battery may cause the battery
to burst or leak, resulting in fire, personal injury,
or ambient pollution. To remove the batteries,
perform the installation actions in reverse. This
remote uses infrared light. When in use, it should
be pointed in the direction of the TV’s remote
sensor.
Type 1
Type 2
A
A
(POWER)
Turns the TV on or off.
Returns to the last TV channel.
(Depending upon model)
Toggles between Radio, TV, CATV,
and DTV.
(Depending upon model)
Activates or deactivates the subtitles.
(Depending upon model)
Recalls your preferred subtitle in digital
mode. (Depending upon model)
(Settings)
Accesses the settings.
(Search)
Shows the search mode.
(INPUT)
Changes the input source.
Number button
Enters numbers.
- (Dash)
Inserts a dash between numbers such as
2-1 and 2-2. (Depending upon model)
Accesses the saved channel list.
Alternates between the two last channels
selected (pressing repeatedly).
Adjusts the volume level.
Accesses your favorite channel list.
Shows information on the current program.
Mutes all sounds.
Scrolls through the saved channels.
Moves to the previous or next screen.
