background image

3

Warning! Safety instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE 
PERSONNEL.

The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient 
magnitude to constitute a risk of electric shock to persons.
The symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature 
accompanying the device.

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

 

TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH 
OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

 

Do not place the TV and/or remote control in the following 

environments:

 

-

Keep the product away from direct sunlight.

 

-

An area with high humidity such as a bathroom.

 

-

Near any heat source such as stoves and other devices that produce 
heat.

 

-

Near kitchen counters or humidifiers where they can easily be exposed 
to steam or oil.

 

-

An area exposed to rain or wind.

 

-

Do not expose to dripping or splashing and do not place objects filled 
with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on 
shelves above the unit).

 

-

Near flammable objects such as gasoline or candles, or expose the TV 
to direct air conditioning.

 

-

Do not install in excessively dusty places.

Otherwise, this may result in fire, electric shock, combustion/explosion, 
malfunction or product deformation.

 

Ventilation

 

-

Install your TV where there is proper ventilation. Do not install in a 
confined space such as a bookcase.

 

-

Do not install the product on a carpet or cushion.

 

-

Do not block or cover the product with cloth or other materials while 
unit is plugged in.

 

Take care not to touch the ventilation openings. When watching the TV 
for a long period, the ventilation openings may become hot.

 

Protect the power cord from physical or mechanical abuse, such as being 
twisted, kinked, pinched, closed in a door, or walked upon. Pay particular 
attention to plugs, wall outlets, and the point where the cord exits the 
device.

 

Do not move the TV whilst the Power cord is plugged in.

 

Do not use a damaged or loosely fitting power cord.

 

Be sure to grasp the plug when unplugging the power cord. Do not pull 
on the power cord to unplug the TV.

 

Do not connect too many devices to the same AC power outlet as this 
could result in fire or electric shock.

 

Disconnecting the Device from the Main Power

 

-

The power plug is the disconnecting device. In case of an emergency, 
the power plug must remain readily accessible.

 

Do not let your children climb or cling onto the TV. Otherwise, the TV 
may fall over, which may cause serious injury.

 

Outdoor Antenna Grounding

 (Can differ by country):

 

-

If an outdoor antenna is installed, follow the precautions below.
An outdoor antenna system should not be located in the vicinity of 
overhead power lines or other electric light or power circuits, or where 
it can come in contact with such power lines or circuits as death or 
serious injury can occur.
Be sure the antenna system is grounded to provide some protection 
against voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC) in the U.S.A. provides 
information with respect to proper grounding of the mast and 
supporting structure, grounding of the lead-in wire to an antenna 
discharge unit, size of grounding conductors, location of antenna 
discharge unit, connection to grounding electrodes and requirements 
for the grounding electrode.
Antenna grounding according to the National Electrical Code, ANSI/
NFPA 70

 

Never touch this apparatus or antenna during a lightning storm. You may 
be electrocuted.

 

Make sure the power cord is connected securely to the TV and wall socket 
if not secured damage to the Plug and socket may occur and in extreme 
cases a fire may break out.

 

Do not insert metallic or inflammable objects into the product. If a 
foreign object is dropped into the product, unplug the power cord and 
contact the customer service.

 

Do not touch the end of the power cord while it is plugged in. You may 
be electrocuted.

Summary of Contents for 43NANO75UQA


























Reviews: