14
ENGLISH
Connections (Notifications)
You can connect various external devices to the TV.
Supported external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices. For
more information on external device’s connection,
refer to the manual provided with each device.
NOTE
•
This model supports 4K (ULTRA HD) videos only
in HDMI input. (For UX970H series)
•
ULTRA HD videos are not supported in the tuner
or USB input. (For UX970H series)
•
If you record a TV program on a DVD recorder or
VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR.
For more information about recording, refer to
the manual provided with the connected device.
•
The external device connections shown may
differ slightly from illustrations in a manual.
•
Connect external devices to the TV regardless
about the order of the TV port.
•
If you connect a gaming device to the TV, use the
cable supplied with the gaming device.
•
Refer to the external equipment’s manual for
operating instructions.
Connecting to an Antenna or
Cable
Connect an antenna, cable, or cable box to watch
TV while referring to the following. The illustrations
may differ from the actual items and an RF cable is
optional.
CAUTION
•
Make sure not to bend the copper wire of the RF
cable.
Copper wire
•
Complete all connections between devices, and
then connect the power cord to the power outlet
to prevent damage to your TV.
NOTE
•
Use a signal splitter to use 2 TVs or more.
•
DTV Audio Supported Codec: MPEG,
Dolby Digital.
•
Direct ULTRA HD broadcast is unavailable in
areas without a ULTRA HD signal. (For UX970H
series)
Other Connections
Connect your TV to external devices. For the best
picture and audio quality, connect the external
device and the TV with the HDMI cable.
NOTE
•
Use only with the 3-pole 3.5 mm stereo jack.
•
Do not connect your headphones or earphones
to the port for connecting an external speaker.
Remote Control
(Image shown may differ from your TV.)
The descriptions in this manual are based on
the buttons on the remote control. Please read
this manual carefully and use the TV correctly. To
install batteries, open the battery cover, replace
batteries (1.5 V AAA) matching the and ends
to the label inside the compartment, and close
the battery cover. Failure to match the correct
polarities of the battery may cause the battery
to burst or leak, resulting in fire, personal injury,
or ambient pollution. To remove the batteries,
perform the installation actions in reverse. This
remote uses infrared light. When in use, it should
be pointed in the direction of the TV’s remote
sensor.
CAUTION
•
Do not mix old and new batteries, as this may
damage the remote control.
(CC)MFL68925833.indb 14
2017-01-18 �� 9:17:31
