LG 43LV560H, Owner'S Manual

Page: 9 / 73

9
ENGLISH
Model
32LV560H
32LV570H
40LV560H
40LV570H
43LV560H
43LV570H
49LV560H
49LV570H
55LV560H
55LV570H
65LV570H
VESA (A x B) 200 x 200 300 x 300 300 x 300
Standard screw M6 M6 M6
Number of
screws
4 4 4
Wall mount
bracket
(optional)
LSW240B
MSW240
LSW350B
MSW240 LSW350B
A
B
• Remove the stand before installing the
TV on a wall mount by performing the
stand attachment in reverse.
•
When using the wall mount, it is recommended
that you apply a piece of tape over the Stand
holes to prevent dust and bugs from entering
the holes. (Depending upon model)
stand hole
Connections (Notifications)
You can connect various external devices to the TV.
Supported external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices. For
more information on external device’s connection,
refer to the manual provided with each device.
• If you record a TV program on a DVD recorder or
VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR.
For more information about recording, refer to
the manual provided with the connected device.
• The external device connections shown may
differ slightly from illustrations in a manual.
• Connect external devices to the TV regardless
about the order of the TV port. If you connect a
gaming device to the TV, use the cable supplied
with the gaming device.
• If you connect a gaming device to the TV, use the
cable supplied with the gaming device.
• Refer to the external equipment’s manual for
operating instructions.
• In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change the PC
output to another resolution, change the refresh
rate to another rate or adjust the brightness and
contrast on the
PICTURE
menu until the picture
is clear.
• When connecting via a wired LAN, it is
recommended to use a CAT 7 cable. (Depending
upon model)
Connecting to an Antenna or Cable
Connect an antenna, cable, or cable box to watch
TV while referring to the following. The illustrations
may differ from the actual items and an RF cable is
optional.
• Make sure not to bend the copper wire of the RF
cable.
Copper wire
• Complete all connections between devices, and
then connect the power cord to the power outlet
to prevent damage to your TV.
• Use a signal splitter to use 2 TVs or more.
• DTV Audio Supported Codec: MPEG, Dolby
Digital.