ENGLISH
26
20
Channel
Skip/Add
(Command: m b)
►
To skip current channel for next time.
Transmission
[m][b][ ][
Set ID
][ ][Data][Cr]
Data 00 : Del(ATSC,ISDB)/Skip(DVB)
Data 01 : Add
Ack
[b][ ][
Set ID
][ ][OK/NG][Data][x]
* Set the saved channel status to del(ATSC, ISDB)/
skip(DVB) or add.
21 Key
(Command: m c)
►
To send IR remote key code.
Transmission
[m][c][ ][
Set ID
][ ][Data][Cr]
Data : Key code - page 16
Ack
[c][ ][
Set ID
][ ][OK/NG][Data][x]
22 Control
Backlight
(Command: m g)
►
To control the backlight.
Transmission
[m][g][ ][
Set ID
][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack
[g][ ][
Set ID
][ ][OK/NG][Data][x]
23 Input select
(Command: x b) (Main Picture Input)
►
To select input source for main picture.
Transmission
[x][b][ ][
Set ID
][ ][Data][Cr]
Data 00 : DTV
Data 01 : CADTV
Data 02 : Satellite DTV ISDB-BS (Japan)
Data 03 : ISDB-CS1 (Japan)
Data 04 : ISDB-CS2 (Japan)
Data 10 : ATV
Data 11 : CATV
Data 20 : AV or AV1
Data 21 : AV2
Data 40 : Component1
Data 41 : Component2
Data 60 : RGB
Data 90 : HDMI1
Data 91 : HDMI2
Data 92 : HDMI3
Data 93 : HDMI4
Ack
[b][ ][
Set ID
][ ][OK/NG][Data][x]
* This function depends on model and signal.
24 Auto Configure
(Command: j u)
(Depending upon model)
►
To adjust picture position and minimize image
shaking automatically. It works only in RGB (PC)
mode.
Transmission
[j][u][ ][
Set ID
][ ][Data][Cr]
Data 01 : To set
Ack
[u][ ][
Set ID
][ ][OK/NG][Data][x]
