background image

3

ENGLISH

 

-

Do not expose to dripping or splashing and 
do not place objects filled with liquids, such as 
vases, cups, etc. on or over the apparatus (e.g., on 
shelves above the unit).

 

-

Near flammable objects such as gasoline 
or candles, or expose the TV to direct air 
conditioning.

 

-

Do not install in excessively dusty places.

Otherwise, this may result in fire, electric shock, 
combustion/ explosion, malfunction or product 
deformation.

 

Ventilation

 

-

Install your TV where there is proper ventilation. 
Do not install in a confined space such as a 
bookcase.

 

-

Do not install the product on a carpet or cushion.

 

-

Do not block or cover the product with cloth or 
other materials while unit is plugged in.

 

Take care not to touch the ventilation openings. 
When watching the TV for a long period, the 
ventilation openings may become hot.

 

Protect the power cord from physical or mechanical 
abuse, such as being twisted, kinked, pinched, 
closed in a door, or walked upon. Pay particular 
attention to plugs, wall outlets, and the point where 
the cord exits the device.

 

Do not move the TV whilst the Power cord is 
plugged in.

 

Do not use a damaged or loosely fitting power cord.

 

Be sure to grasp the plug when unplugging the 
power cord. Do not pull on the power cord to 
unplug the TV.

 

Do not connect too many devices to the same AC 
power outlet as this could result in fire or electric 
shock.

Warning! Safety instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC 
SHOCK DO NOT REMOVE COVER (OR BACK). 
NO USER SERVICEABLE PARTS INSIDE. REFER TO 
QUALIFIED SERVICE PERSONNEL.

 The symbol is intended to alert the user to 
the presence of uninsulated dangerous 

voltage within the product’s enclosure that may 
be of sufficient magnitude to constitute a risk of 
electric shock to persons.

 The symbol is intended to alert the user to 
the presence of important operating and 

maintenance (servicing) instructions in the 
literature accompanying the device.
WARNING: TO REDUCE THE RISK OF FIRE 
AND ELECTRIC SHOCK, DO NOT EXPOSE THIS 
PRODUCT TO RAIN OR MOISTURE.

 

TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES 
OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM 
THIS PRODUCT AT ALL TIMES.

 

Do not place the TV and/or remote control in the 
following environments:

 

-

Keep the product away from direct sunlight.

 

-

An area with high humidity such as a bathroom

 

-

Near any heat source such as stoves and other 
devices that produce heat.

 

-

Near kitchen counters or humidifiers where they 
can easily be exposed to steam or oil.

 

-

An area exposed to rain or wind.

Summary of Contents for 43LT572M0UC













































Reviews: