LG 43LM5700PTC Service Manual Download Page 10

Page: 10 / 79

- 10 -

Only training and service purposes.

SOFTWARE UPDATE

1. USB DOWNLOAD

(1) Insert the USB memory Stick to the USB port.

(2) Automatically detect the SW Version and show the below

message.

(3) Click [YES]: initiate the download and install of the update.

(4) Click [Check Now]: move to “About This TV” page for update.

(5) TV is updating.

(6) After finished the update, below Pop-up appear.

(7) Click [Yes] : TV will be DC OFF

→

ON.

(8) After TV turned on, Check the updated SW Version and

Tool Option.

2. NSU DOWNLOAD

(This Function is needed to connect to the internet.)

Case 1) Allow Automatic Updates Toggle Item

(1) Menu -> All Settings -> General -> About This TV

(2) Silent Update_Pop-up

When the download and install of the update is complete, the

TV issues a Toast notification letting the user know that the

update is complete and a reboot is required.

(3) If you want to see the update progress, go to [Menu → All

Settings → General → About This TV]

(4) If you want to cancel update, click (1.1) CANCEL UPDATE

(5) [NO] : Keep updating

[Yes] : Cancel updating

Summary of Contents for 43LM5700PTC












































































Search results

Summary of Contents for 43LM5700PTC

Reviews:

Related manuals for 43LM5700PTC

Brands by name

Popular brands

LG 43LM5700PTC, Service Manual

Search results

Summary of Contents for 43LM5700PTC

Reviews:

Related manuals for 43LM5700PTC

Brands by name

Popular brands