manualshive.com logo in svg

LG 42WS50MW, Owner'S Manual, Page: 55 / 89

Share
Download
LG 42WS50MW Owner'S Manual Download Page 55

55

ENG

ENGLISH

MAKING CONNECTIONS

VIDEO

AUDIO OUT

External Device Connection

Connect a HD receiver, DVD, or VCR player to the 
Monitor and select an appropriate input mode.

HDMI connection

Transmits the digital video and audio signals from 
an external device to the Monitor. Connect the 
external device and the Monitor with the HDMI 
cable as shown on the following illustration.

Component connection

Transmits the analog video and audio signals 
from an external device to the Monitor. Connect 
the external device and the Monitor with the 15 
pin signal to RCA cable as shown on the following 
illustration. To display images by using progressive 
scan, make sure to use the component cable.

HDMI

(not included)

(not included)

(not included)

y

y

Use a High Speed HDMI

®/TM

 Cable.

y

y

Use a certified cable with the HDMI logo 
attached. If you do not use a certified HDMI 
cable, the screen may not display or a 
connection error may occur. 

y

y

Recommended HDMI Cable Types 
- High-Speed HDMI

®/TM

 Cable 

- High-Speed HDMI

®/TM

 Cable with Ethernet

y

y

High Speed HDMI

®/TM

 Cables are tested to 

carry an HD signal up to 1080p and higher.

NOTE

Summary of Contents for 42WS50MW


























































































Reviews:

No comments