LG 42PQ10R, Owner'S Manual

Page: 106 / 112

APPENDIX
106
Command Reference List
APPENDIX
Transmission / Receiving Protocol
T Trraan nssm miissssiio on n
[Command 1] : First command to control the set.
(j, k, m or x)
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired TV ID
number in Setup menu. Adjustment range is 1
~
99.
When selecting Set ID ‘0’, every connected the TV is
controlled. Set ID is indicated as decimal (1
~
99) on
menu and as Hexa decimal (0x0
~
0x63) on transmission
/receiving protocol.
[DATA] : To transmit the command data.
Transmit the ‘FF’ data to read status of command.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
* In this model, TV will not send the status during the standby mode.
O OK K A Acckkn no ow wlle ed dg ge em me en ntt
The TV transmits ACK (acknowledgement) based on this for-
mat when receiving normal data. At this time, if the data is
data read mode, it indicates present status data. If the data is
data write mode, it returns the data of the PC computer.
* In this model, TV will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.
[OK] : Use the large character.
E Errrro orr A Acckkn no ow wlle ed dg ge em me en ntt
The TV transmits ACK (acknowledgement) based on this for-
mat when receiving abnormal data from non-viable functions
or communication errors.
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
* In this model, TV will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.
[NG] : Use the large character
[[C Co om mm maannd d1 1]][[C Co om mm maannd d2 2]][[ ]][[SSeett IID D]][[ ]][[D Daattaa]][[C Crr]]
[[C Co om mm maannd d2 2]][[ ]][[SSeett IID D]][[ ]][[O OK K]][[D Daattaa]][[xx]]
[[C Co om mm maannd d2 2]][[ ]][[SSeett IID D]][[ ]][[N NG G]][[D Daattaa]][[xx]]
C CO OM MM MA AN ND D1 1 C CO OM MM MA AN ND D2 2
DATA
(Hexadecimal)
C CO OM MM MA AN ND D1 1 C CO OM MM MA AN ND D2 2
14. Color Temperature k u 00 ~ 02
15. Treble k r 00 ~ 64
16. Bass k s 00 ~ 64
17. Abnormal State k z FF
18. ISM Method j p Refer to p.109
19. Auto Configure j u 01
20. Low Power(Power/Energy Saving)j q Refer to p.109
21. Channel Tuning m a Refer to p.110
22. Channel Add/Del m b 00
~
01
23. Key m c Refer to p.111
24. Input select (Main) x b Refer to p.111
DATA
(Hexadecimal)
01. Power k a 00 ~ 01
02. Aspect Ratio k c Refer to p.107
03. Screen Mute k d Refer to p.107
04. Volume Mute k e 00 ~ 01
05. Volume Control k f 00
~
64
06. Contrast k g 00
~
64
07. Brightness k h 00
~
64
08. Color k i 00
~
64
09. Tint k j 00
~
64
10. Sharpness k k 00
~
64
11. OSD Select k l 00
~
01
12. Remote Control Lock 00 ~ 01
/Key Lock Mode
13. Balance k t 00 ~ 64
k m
Except 42/50PQ10R
MFL58486302-Edit4-en 5/15/09 2:55 PM Page 106