- 12 -
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
(5) EEPROM DATA READ
1) Signal TABLE
2) Command Set
To read the appointment Address of E2PROM by 128(80h)
-byte
(6) EEPROM Data Write(serial number D/L)
1) Signal TABLE
CMD
: 8Eh
LENGTH : 84h+Byte
ADH
: E2PROM Slave Address (A0, A2, A4, A6, A8),
Not 00h (Reserved by Buffer To EEPROM)
ADL
: E2PROM Sub Address (00~FF)
Data
: Write data
CS
: CMD + ADH + ADL + ... +
Data_n
2) Command Set
* Description
FOS Default write : <7mode data> write
Vtotal, V_Frequency, Sync_Polarity, Htotal, Hstart, Vstart, 0,
Phase
Data write : Model Name and Serial Number write in
EEPROM,.
Delay : 20ms
3) Command Set
* Description
FOS Default write : <7mode data> write
Vtotal, V_Frequency, Sync_Polarity, Htotal, Hstart, Vstart, 0,
Phase
Data write : Model Name and Serial Number write in
EEPROM,.
