LG 42LX330C.AMF, Installation Manual

Page: 13 / 54

ENG
ENGLISH
13
INSTALLATION MENU
- OSD Display
Decide to display OSD or not by setting ‘OSD Display’ as Yes(Display) or No(Do not Display).
y y
When ‘OSD Display’ is set to ‘No’(Do not Display), all OSD is not displayed except some
exception.
y y
Although select ‘No’ (Do not Display), the action that press a Menu button for 5 seconds
to enter ‘Installation Menu’ and entering service menu are available. (In-Start, Power-Only,
Adjust, Installation Menu …)
- System Provider Mode
- ‘System Provider Mode’ allows access to the menu system from the front panel or remote control
but access is controlled as follows:
y y
When value is ‘Yes’, Accessible Items on the menu system, others are not permissible.
»
Input select screens
» Sleep timer
» Alarm
»
Aspect Ratio
» Closed Caption
»
‘Lock’ / ‘My Media’ / ‘Network’ / ‘Support’ / ‘Bluetooth’ Menu
y y
‘Q.menu’, which is related to ‘Setup’ Menu, is not accessible.
y y
If the channel map is empty, ‘Auto-tuning’ guide dialog should be blocked by pressing ‘List’,
‘Fav’, ‘CH+’, ‘CH-’ keys.
6 Power Management
The Power Management feature will turn off the television receiver if no input control command is
received from either the Local or IR Key within a selected hours.
y y
Activity on either of these inputs shall restart the ‘Power Management’ timer and check key
time interval again.
y y
This entry can be set to a value which is corresponding to the desired hours (1 to 7).
y y
Default value is ‘Off(disabled)’.
y y
TV should off and on after apply this setting.
7 DTV Programme Update
- It is a mode to set whether to update DTV channel information automatically or not.
y y
When DTV Channel Update is set to ’Auto’, the function to update TV’s programme map
according to DTV channel’s stream information
y y
DTV Channel Update is set to ‘Manual’, the function to keep TV’s channel map even though
DTV programme’s information is changed.
8 Power On Default
Set the input source or channel to display and. A/V settings when turn on power in AC Power On or
Stand-by status.
- Input Source
Set whether it is turned on by the set input source or by the last stored input source.
y y
It is turned on by the Last Memory Input if the Input source is turned off.
y y
It is turned on by the Last Pr. If the Input source is turned off and the last memory Input is the
RF.
y y
The available Input Source values should be rotated.
y y
If both the Input source and the ‘On Time’ menu are set, the Input source takes the priority.
y y
When the Input source is changed to the TV, Programme menu is available.
y y
When the Input source is changed to the ATV, the Program No. is set to 0. (If the channel map
structure does not support this, it depends on model’s channel handling.
y y
Access to an input source item and a channel in ‘On Timer’ menu must be disabled when
Power On Default is activated.