background image

4

 

If any of the following occur, unplug the product immediately 

and contact your local customer service.

 

-

The product has been damaged.

 

-

If water or another substance enters the product (like an AC adapter, 
power cord, or TV).

 

-

If you smell smoke or other odors coming from the TV

 

-

When lightning storms or when unused for long periods of time.

Even the TV is turned off by remote control or button, AC power source is 
connected to the unit if not unplugged in.

 

Do not use high voltage electrical equipment near the TV (e.g., a bug 
zapper). This may result in product malfunction.

 

Do not attempt to modify this product in any way without written 
authorization from LG Electronics. Accidental fire or electric shock 
can occur. Contact your local customer service for service or repair. 
Unauthorized modification could void the user’s authority to operate 
this product.

 

Use only an authorized attachments / accessories approved by LG 
Electronics. Otherwise, this may result in fire, electric shock, malfunction, 
or product damage.

 

Never disassemble the AC adapter or power cord. This may result in fire 
or electric shock.

 

Handle the adapter carefully to avoid dropping or striking it. An impact 
could damage the adapter.

 

To reduce the risk of fire or electrical shock, do not touch the TV with wet 
hands. If the power cord prongs are wet or covered with dust, dry the 
power plug completely or wipe dust off.

 

Batteries

 

-

Store the accessories (battery, etc.) in a safe location out of the reach 
of children.

 

-

Do not short circuit, disassemble, or allow the batteries to overheat. 
Do not dispose of batteries in a fire. Batteries should not be exposed 
to excessive heat.

 

-

Caution: Risk of fire or explosion if the battery is replaced by an 
incorrect type.

 

Moving

 

-

When moving, make sure the product is turned off, unplugged, and 
all cables have been removed. It may take 2 or more people to carry 
larger TVs. Do not press or put stress on the front panel of the TV. 
Otherwise, this may result in product damage, fire hazard or injury.

 

Keep the packing anti-moisture material or vinyl packing out of the 
reach of children.

 

Do not allow an impact shock, any objects to fall into the product, and do 
not drop anything onto the screen.

 

Do not press strongly upon the panel with a hand or a sharp object such 
as a nail, pencil, or pen, or make a scratch on it. It may cause damage 
to screen.

 

Cleaning

 

-

When cleaning, unplug the power cord and wipe gently with a soft/
dry cloth. Do not spray water or other liquids directly on the TV. Do 
not clean your TV with chemicals including glass cleaner, any type of 
air freshener, insecticide, lubricants, wax (car, industrial), abrasive, 
thinner, benzene, alcohol etc., which can damage the product and/
or its panel. Otherwise, this may result in electric shock or product 
damage.

 

When changing the curvature or moving the screen, do not place any 
objects in the movement area, and be careful not to get your fingers or 
foreign objects caught in the movement area. Doing so may result in 
product damage or personal injury. (Depending upon model)

 

Do not hold the screen part while the product’s curvature change is in 
effect. Doing so may result in product damage. (Depending upon model)

Installation

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from 
being scratched or damaged and for safe transportation regardless of its type 
and size.

 

It is recommended to move the TV in the box or packing material that 
the TV originally came in.

 

Before moving or lifting the TV, disconnect the power cord and all cables.

 

When holding the TV, the screen should face away from you to avoid 
damage.

 

Hold the side and bottom of the TV frame firmly. Make sure not to hold 
the transparent part, speaker, or speaker grille area. (Depending upon 
model)

 

Use at least two people to move a large TV.

 

When transporting the TV, do not expose the TV to jolts or excessive 
vibration.

 

When transporting the TV, keep the TV upright; never turn the TV on its 
side or tilt towards the left or right.

 

When handling the TV, be careful not to damage the protruding buttons.

 

Avoid touching the screen at all times, as this may result in damage to 
the screen.

 

Do not place the product on the floor with its front facing down without 
padding. Failure to do so may result in damage to the screen.

 

When attaching the stand to the TV set, place the screen facing down on 
a cushioned table or flat surface to protect the screen from scratches.

Mounting on the Table

1  Lift and tilt the TV into its upright position on a table.

• 

Leave a minimum of 10 cm (4 inches) space from the wall for proper 
ventilation (Depending upon model).

2  Connect the power cord to a wall outlet.

Summary of Contents for 42LX1QPUA






























Reviews: