MOTION REMOTE BOARD SECTION
The first time the Motion Remote has it’s batteries installed and pointed at the
Television, the Motion Remote is synchronized with the TV. After that, when
Television, the Motion Remote is synchronized with the TV. After that, when
pointing the remote at the TV and pressing the Enter key, a pointer appears
on screen, then by moving the Motion Remote around, the pointer moves
with the movement of the remote. When the pointer is placed over a
selectable button, you can press the center “Enter” button and active the
selectable button, you can press the center Enter button and active the
object. This makes navigation much easier.
You can also adjust the volume, change channels and mute the audio with the
Motion Remote and it has a convenient “Home” button for the TV Menu.
ot o
e ote a d t as a co e e t
o e butto o t e
e u
A wrist band can be attached to the remote to avoid dropping and damaging the
remote.
The Motion Remote utilizes a specialized receiver on the Television to receive
the RF signal and this information is then routed to P1302 and on to the
IC101 the BCM IC for pointer positioning and interpretation of the other
functions.
How to
Re-register the Magic Motion Remote
Control after Registration Failure. Reset the
remote control by pressing and holding both the
ENTER
and
MUTE
buttons for
5 seconds
.
An LED will blink 3 times indicating the remote is ready for registering.
May 2011 LCD TV 42LV5500
82
