LG 40UH630V Service Manual Download

Page: 6 / 74

- 6 -

LGE Internal Use Only

Only for training and service purposes

SPECIFICATION

NOTE : Specifications and others are subject to change without notice for improvement.

1. Application range

This specification is applied to the LED TV used UD63V

chassis.

2. Requirement for Test

Each part is tested as below without special notice.

1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C

2) Relative Humidity: 65 % ± 10 %

3) Power Voltage

: Standard input voltage (AC 100-240 V~, 50/60 Hz)

* Standard Voltage of each products is marked by models.

4) Specification and performance of each parts are followed

each drawing and specification by part number in

accordance with BOM.

5) The receiver must be operated for about 20 minutes prior to

the adjustment.

3. Test method

1) Performance: LGE TV test method followed

2) Demanded other specification

- Safety : CE, IEC specification

- EMC : CE, IEC specification

- Wireless : Wireless HD Specification (Option)

4. Model General Specification

No.

Item

Specification

Remarks

Market

EU/CIS(PAL Market-37Countries)

DTV & Analog (Total 37 countries)

DTV (MPEG2/4, DVB-T) : 26 countrie

Germany, Netherland, Switzerland, Hungary, Austria, Slovenia, Bulgaria,

France, Spain, Belgium, Luxemburg, Greece, Czech, Turkey, Morocco,

Ireland, Latvia, Estonia, Lithuania, Poland, Portugal, Romania, Albania,

Bosnia, Slovakia, Belarus

DTV (MPEG2/4, DVB-T2) :11 countries

UK(Ireland), Sweden, Denmark, Finland, Norway, Ukraine, Kazakhstan,

Russia, Italy, Croatia, Serbia

DTV (MPEG2/4, DVB-C) : 37 countries

Germany, Netherland, Switzerland, Hungary, Austria, Slovenia, Bulgaria,

France, Spain, Italy, Belgium, Russia, Luxemburg, Greece, Czech, Cro-

atia, Turkey, Morocco, Ireland, Latvia, Estonia, Lithuania, Poland, Portu-

gal, Romania, Albania, Bosnia, Serbia, Slovakia, Belarus, UK, Sweden,

Denmark, Finland, Norway, Ukraine, Kazakhstan

DTV (MPEG2/4,DVB-S) : 37 countries

Germany, Netherland, Switzerland, Hungary, Austria, Slovenia, Bulgaria,

France, Spain,Belgium, Luxemburg, Greece, Czech, Turkey, Morocco,

Ireland, Latvia, Estonia, Lithuania, Poland, Portugal, Romania, Albania,

Bosnia, Slovakia, Belarus, UK(Ireland), Sweden, Denmark, Finland,

Norway, Ukraine, Kazakhstan,Russia, Italy, Croatia, Serbia

Supported satellite : 35 satellites

ABS1 75.0E, AMOS 4.0W, ASIASAT3S 105.5E, ASTRA 19.2E, ASTRA

23.5E, ASTRA 28.2E, ASTRA 4.8E, ATLANTIC BIRD2 8.0W, ATLANTIC

BIRD3 5.0W, BADR 26.0E, DIRECTV-1R 56.0E, EUROBIRD 9A 9.0E,

EUROBIRD3 33.0E, EUTELSAT 36 A/B 36.0E,EUTELSAT W2A 10.0E,

EUTELSAT W3A 7.0E, EUTELSAT7WA 7.3WEUTELSAT 16.0E, EX-

PRESS AM1 40.0E, EXPRESS AM3 140.0E, EXPRESS AM33 96.5E,

HELLASSAT 39.0E, HISPASAT 1CDE 30.0WHOTBIRD 13.0E, INTEL-

SAT10&7 68.5E, INTELSAT15 85.2E, INTELSAT1R 50.0W, INTEL-

SAT903 33.5W, INTELSAT904 60.0E, NILESAT 7.0W, NSS12 57.0E,

THOR 0.8W, TURKSAT 42.0E,YAMAL201 90.0E, OTHER

Summary of Contents for 40UH630V































































Search results

Summary of Contents for 40UH630V

Reviews:

Related manuals for 40UH630V

Brands by name

Popular brands

LG 40UH630V, Service Manual

Search results

Summary of Contents for 40UH630V

Reviews:

Related manuals for 40UH630V

Brands by name

Popular brands