background image

5

ENGLISH

 

This apparatus uses batteries. In your community 

there might be regulations that require you 

to dispose of these batteries properly due to 

environmental considerations. Please contact 

your local authorities for disposal or recycling 

information.

 

The battery (battery or batteries or battery pack) 

shall not be exposed to excessive heat such as 

sunshine, fire or the like.

FCC NOTICE

(For USA)
This equipment has been tested and found to 

comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits 

are designed to provide reasonable protection 

against harmful interference in a residential 

installation. This equipment generates, uses 

and can radiate radio frequency energy and, if 

not installed and used in accordance with the 

instructions, may cause harmful interference 

to radio communications. However, there is no 

guarantee that interference will not occur in a 

particular installation. If this equipment does 

cause harmful interference to radio or television 

reception, which can be determined by turning 

the equipment off and on, the user is encouraged 

to try to correct the interference by one or more of 

the following measures:
- Reorient or relocate the receiving antenna.
-  Increase the separation between the equipment 

and the receiver.

-  Connect the equipment to an outlet on a circuit 

different from that to which the receiver is 

connected.

-  Consult the dealer or an experienced radio/TV 

technician for help.

This device complies with part 15 of the FCC 

Rules. Operation is subject to the following two 

conditions: (1) this device may not cause harmful 

interference and (2) this device must accept any 

interference received, including interference that 

may cause undesired operation of the device. Any 

changes or modifications in construction of this 

device which are not expressly approved by the 

party responsible for compliance could void the 

user’s authority to operate the equipment.

 

Do not short circuit, disassemble, or allow the 

batteries to overheat.

 

Do not use high voltage electrical equipment 

near the TV. (e.g., a bug zapper.)  

This may result in product malfunction.

 

Dot Defect

 

The panel is a high technology product with 

resolution of two million to six million pixels. 

In a very few cases, you could see fine dots on 

the screen while you’re viewing the TV. Those 

dots are deactivated pixels and do not affect the 

performance and reliability of the TV.

 

Generated Sound

 

Cracking noise

 A cracking noise that occurs 

when watching or turning off the TV is 

generated by plastic thermal contraction due to 

temperature and humidity. This noise is common 

for products where thermal deformation is 

required.  

Electrical circuit humming/panel buzzing

 

A low level noise is generated from a high-

speed switching circuit, which supplies a large 

amount of current to operate a product. It varies 

depending upon the product. This generated 

sound does not affect the performance and 

reliability of the product.

 

Take care not to touch the ventilation openings. 

When watching the TV for a long period, the 

ventilation openings may become hot. This does 

not affect the performance of the product or 

cause defects in the product.

 

Do not install this product on a wall if it could be 

exposed to oil or oil mist. This may damage the 

product and cause it to fall.

 

If the TV feels cold to the touch, there may 

be a small flicker when it is turned on. This is 

normal; there is nothing wrong with TV. Some 

minute dot defects may be visible on the screen, 

appearing as tiny red, green, or blue spots. 

However, they have no adverse effect on the TV’s 

performance. Avoid touching the LCD screen or 

holding your finger(s) against it for long periods 

of time. Doing so may produce some temporary 

distortion effects on the screen.

       This equipment is a Class 

or double insulated 

electrical appliance. It has been designed in such a 

way that it does not require a safety connection to 

electrical earth.

Preventing Image Burn or Burn-in on 

Your TV Screen

 

Displaying a still image for a prolonged period of 

time may cause image sticking. 

Avoid displaying a fixed image on the TV screen 

for a long period of time.

Summary of Contents for 40LH5000-UA





















Reviews: