Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
- 14 -
5.2 Adjustment of Component
*Required Equipments
8
Remote controller for adjustment
8
MSPG-925FS Pattern Generator. (Which has 720p/60Hz
YPbPr output Pattern shown in Fig. 2)
=> Model: 216 / Pattern: 65
5.2.1 Method of Auto Component Color Balance
1) Input the Component 720p/60Hz 7 Color Bar (MSPG-
925FS model:216, pattern:65) signal into Component.
2) Set the PSM to Dynamic mode in the Picture menu.
[Fig.1]
3) Press IN-START key on R/C for adjustment.
4) Press the
G
(Vol.+) key to operate the set, then it
becomes automatically.
5) Auto-RGB OK means the adjustment is completed.
5.3 Adjustment of RGB
*Required Equipments
8
Remote controller for adjustment
8
MSPG-925FS Pattern Generator
(Which has XGA [1024*768] 60Hz 8 color bar 100%
pattern shown in Fig. 3 )
5.3.1 Method of Auto RGB Color Balance
1) Input the PC 1024x768 @ 60Hz 7 Color Bar (MSPG-
925FS model:3, pattern:65) signal into RGB. (using
D-sub to D-sub cable)
2) Set the PSM to Dynamic mode in Picture menu.
3) Press the IN-START key on R/C for adjustment.
[Fig.3]
4) Press the
G
(Vol.+) key operate To set , then it
becomes automatically.
5) Auto-RGB OK means adjustment is completed
