manualshive.com logo in svg

LG 32TNF5J, Owner'S Manual, Page: 5 / 134

Share
Download
LG 32TNF5J Owner'S Manual Download Page 5

5

ENGLISH

Installation Location

We are not responsible for product damage caused by failure to follow the guide.
This product is used as a built-in product installed inside the enclosure.

 

-

The product warranty will be void if it is used with the front panel exposed to direct sunlight.

 

-

Wear work gloves when installing the product.

 

-

Installing the product with bare hands may cause injury.

Indoor

Installing the monitor in the enclosure

If installing the product inside the enclosure, install the stand (optional) on the rear side of the product.
When installing the product using the stand (optional), attach the stand securely to the monitor to ensure it does not 

fall.

VESA Mount Hole

A

B

Model

VESA Dimensions 

(A x B) (mm)

Standard 

Dimensions

Length (Maximum) 

(mm)

Quantity

32TNF5J

200 x 200

M6

21.0

4

43TNF5J

200 x 200

M6

15.5

4

55TNF5J

300 x 300

M6

14.0

4

Model

VESA Dimensions 

(A x B) (inches)

Standard 

Dimensions

Length (Maximum) 

(inches)

Quantity

32TNF5J

7.8 x 7.8

M6

0.8

4

43TNF5J

7.8 x 7.8

M6

0.6

4

55TNF5J

11.8 x 11.8

M6

0.5

4

Summary of Contents for 32TNF5J







































































































































Reviews:

No comments