LG 32SM5D Owner'S Manual Download Page 33

Page: 33 / 123

ENGLISH

PRODUCT SPECIFICATIONS

The product specifications below may be changed without prior notice due to upgrade of product functions.
“ ” refers to alternating current (AC), and “ ” refers to direct current (DC).

LCD screen

Screen type

Thin Film Transistor (TFT)
Liquid Crystal Display (LCD) Screen

Video signal

Maximum resolution

3840 x 2160 @ 30 Hz (HDMI1, HDMI2, DP)
1920 x 1080 @ 60 Hz (OPS, DVI-D, RGB)

- This may not be supported on some OS or graphics card

types.

Recommended resolution

1920 x 1080 @ 60 Hz

- This may not be supported on some OS or graphics card

types.

Horizontal frequency

RGB: 30 kHz to 83 kHz
HDMI/ DVI-D/ DisplayPort: 30 kHz to 83 kHz

Vertical frequency

RGB: 56 Hz to 75 Hz
DVI-D/ OPS: 56 ~ 60 Hz
HDMI/ DP: 30Hz, 56 ~ 60Hz

Synchronization

Separate Sync, Digital

Input/output ports

**SM5D/ **SM3D

SPEAKER OUT, AUDIO IN/OUT, HDMI1, HDMI2, PIXEL SENSOR,

IR & LIGHT SENSOR, DP IN/OUT, DVI-D IN, RGB IN, LAN,

USB3.0 IN, RS-232 IN/OUT

**SM5KD

AUDIO IN/OUT, HDMI1, HDMI2, PIXEL SENSOR, IR & LIGHT

SENSOR, DP IN/OUT, DVI-D IN, RGB IN, LAN, USB3.0 IN, RS-

232 IN/OUT

Embedded battery

Applied

Environmental

Conditions

Operating Temperature

0 °C to 40 °C (32 °F to 104 °F)

Operating Humidity

10 % to 80 %

Storage Temperature

-20 °C to 60 °C (-4 °F to 140 °F)

Storage Humidity

5 % to 85 %

* Applicable only for models that support the speakers

Audio

RMS Audio Output

10 W + 10 W (R + L)

Input Sensitivity

0.7 Vrms

Speaker Impedance

6 Ω

* DP Cable: Use a DP cable that is certified to a DP 1.1a (SST) standard or higher.

Summary of Contents for 32SM5D




























































































































Search results

Summary of Contents for 32SM5D

Reviews:

LG 32SM5D, Owner'S Manual, Page: 33 / 123

Search results

Summary of Contents for 32SM5D

Reviews: