Copyright 2011 LG Electronics.Inc.All right reserved.
Only for training and service purposes
C
LGE Internal Use Only
- 19 -
Measurement condition:
1. RF input: Mono, 1KHz sine wave signal, 100% Modulation
2. CVBS, Component: 1KHz sine wave signal
0.5Vrms
3. RGB PC: 1KHz sine wave signal 0.7Vrms
-----<<<8. Magic Romocon Test
- Equipment:
RF-Remote Controller for Test, IR-KEY-CODE Remote Controller for Test.
- should have enough Battery Power of RF-Remote Controller before test.
(Recommend: changing new Battery for each LOT.)
- Test Method
a) Push “Mute (Start Key)” on the controller to pair the TV SET.
b) Push “OK Key” on the controller, check whether the cursor appears on the screen.
c) Push “Vol+(STOP) on the controller, cancel the paring.
>>>>>----
9. 3D Function test
(Pattern Generator MSHG-600 or MSPG-6100 HDMI 1.4 Supported Equipment
, HDMI mode No. 872 , pattern No. 83)
1) Input 3D test pattern.
(HDMI mode No. 872, Pattern No. 83)
2) After automatically display 3D OSD, push the OK Key.
3) Check the pattern such as in the following Fig2 without having to wear glasses.
Summary of Contents for 32LW5500
Page 56: ......
