background image

14

ENGLISH

Fine-tuning Picture Mode

 

(Settings)   Picture   Picture Mode Settings 

This feature allows you to adjust the selected picture mode in detail.

• 

Backlight

 : Controls the level of screen brightness by adjusting the 

backlight. The closer to 100, the brighter the screen.

• 

Contrast

 : Adjusts the contrast of the bright and dark areas of the 

picture. The closer to 100, the higher the contrast.

• 

Brightness

 : Adjusts the overall screen brightness. The closer to 

100, the brighter the screen.

• 

Sharpness

 : Adjusts the sharpness of the image. The closer to 50, 

the sharper and clearer the image.

• 

Colour

 : Tones down or up the colours displayed on the screen. The 

closer to 100, the deeper the colour.

• 

Tint

 : Adjusts the colour balance between red and green displayed 

on the screen. The closer to Red 50, the more red the colour will be. 
The closer to Green 50, the more green the colour will be.

• 

Colour Temperature

 : Adjusts the colour temperature from cold 

to warm.

•  Depending on input signal or other picture settings, the range of 

detailed items for adjustment may differ.

To set advanced controls

 

(Settings)   Picture   Picture Mode Settings   Advanced 

Controls / Expert Controls

Calibrates the screen for each picture mode; or adjusts picture settings 
for a special screen.

• 

Dynamic Contrast

 : Adjusts the contrast to the optimal level 

according to the brightness of the image.

• 

Dynamic Colour

 : Adjusts colours to make the image appear in 

more natural colours.

• 

Preferred Colour

 : Adjust the colours of skin, grass and sky to 

your personal preferences.

• 

Gamma

 : Sets the gradation curve according to the output of 

picture signal in relation to the input signal.

• 

Colour Gamut

 : Selects the range of colours that can be 

expressed.

• 

Edge Enhancer 

: Shows clearer and distinctive yet natural edges 

of the video.

• 

Colour Filter

 : Filters a specific colour spectrum in RGB colours to 

fine-tune colour saturation and hue accurately.

• 

White Balance 

: Adjusts the overall tone of the screen as desired.

• 

Colour Management System

 : This is a system that experts use 

when they adjust colour with a test pattern. They can select from 
six colour areas (Red / Green / Blue / Cyan / Magenta / Yellow) 
without affecting other colours. For normal images, adjustments 
may not result in noticeable colour changes.

•  Depending on input signal or other picture settings, the range of 

detailed items for adjustment may differ.

To set additional picture options

 

(Settings)   Picture   Picture Mode Settings    Picture 

Options

Adjusts detailed setting for images.

• 

Noise Reduction

 : Eliminates noise in the picture.

• 

MPEG Noise Reduction

 : Eliminates noise generated while 

creating digital picture signals.

• 

Black Level

 : Adjusts the brightness and contrast of the screen 

to suit the black level of the input picture by using the blackness 
(black level) of the screen.

• 

Real Cinema

 : Optimizes the screen for movie viewing.

• 

Motion Eye Care 

: Automatically adjusts brightness and reduces 

image blur based on image data to reduce eyestrain.

•  Depending on input signal or other picture settings, the range of 

detailed items for adjustment may differ.

Resetting picture settings

 

(Settings)   Picture   Picture Mode Settings    Picture 

Reset

Resets picture settings that the user customizes. Each picture mode is 
reset. Select the picture mode you wish to reset.

To use Energy Saving feature

 

(Settings)   Picture     Energy Saving 

Reduces power consumption by adjusting screen brightness.

• 

Auto

 : [Depending on model]  

The TV sensor detects the ambient lighting and automatically 
adjusts the screen brightness.

• 

Off

 : Turns off the Energy Saving mode.

• 

Minimum / Medium / Maximum

 : Applies the pre-set Energy 

Saving mode.

• 

Screen Off 

: Screen is turned off and only sound is played. Press 

any button except Power button on the remote control to turn the 
screen back on. 

To use Eye Comfort Mode feature

 

(Settings)   Picture   Eye Comfort Mode

If you turn this option on, colour temperature will be automatically 
adjusted to reduce eye strain.

• 

On

 : Automatically adjusts the screen color temperature.

• 

Off

 : Turns off the

 Eye Comfort Mode

.

Summary of Contents for 32LH510D-TA
















































Reviews: