12
ENGLISH
Connections (notifications)
Connect various external devices to the TV and switch input modes to
select an external device. For more information of external device’s
connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio
systems, USB storage devices, PC, gaming devices, and other external
devices.
NOTE
•
The external device connection may differ from the model.
•
Connect external devices to the TV regardless of the order of the
TV port.
•
If you record a TV program on a DVD recorder or VCR, make sure to
connect the TV signal input cable to the TV through a DVD recorder
or VCR. For more information of recording, refer to the manual
provided with the connected device.
•
Refer to the external equipment’s manual for operating
instructions.
•
If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
•
In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the PICTURE
menu until the picture is clear.
•
In PC mode, some resolution settings may not work properly
depending on the graphics card.
Antenna connection
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
•
Use a signal splitter to use more than 2 TVs.
•
If the image quality is poor, install a signal amplifier properly to
improve the image quality.
•
If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
•
An antenna cable and converter are not supplied.
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
Remote control
(Depending on model)
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5
V AAA) matching the and ends to the label inside the
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
CAUTION
•
Do not mix old and new batteries, as this may damage the remote
control.
•
In Analogue TV and some countries, some remote control buttons
may not work.
•
The remote control will not be included depending on sales market.
Make sure to point the remote control toward the remote control sensor
on the TV.
A
B
1
2
3
4
5
6
7
8
0
9
P
A
G
E
FAV
MUTE
Q.VIEW
EXIT
OK
LIST
MY APPS
LIVE TV
REC
TEXT
T.OPT
SUBTITLE
BACK
SETTINGS
INFO
GUIDE
INPUT
RATIO
TV/
RAD
SLEEP
Q.MENU
AD/
A
(POWER)
Turns the TV on or off.
Recalls your preferred subtitle in digital mode.
Resizes an image.
Changes the input source.
Selects Radio, TV and DTV programme.
Number buttons
Enters numbers.
Accesses the saved programme list.
Returns to the previously viewed programme.
Summary of Contents for 32LF58 Series
Page 15: ......
