LG 32LD350 Troubleshooting Manual Download Page 16

Page: 16 / 71

1) Create an LG_DTV folder on the USB Flash Drive

USB Automatic Software Download Instructions

Currently

Installed

Version

Software

Version

found on the

USB Flash

Drive

File found

on the USB
Flash Drive

2) Copy new software (xxx.epk) to "LG_DTV"

folder. Make sure to have correct software file.

3) With TV turned on insert USB flash drive

3) With TV turned on, insert USB flash drive.
4) You can see the message

“TV Software Upgrade” (See figure to right)

5) Cursor left and highlight "START" Button and

push “Enter” button using the remote control.

6) You can see the download progress Bar.
7) Do not unplug until unit has automatically

restarted.

8) When download is completed, you will see

“COMPLETE”

* CAUTION:
Do not remove AC power or the USB Flash Drive.
Do not turn off Power, during the upgrade
process.

November LCD TV 32LD350

COMPLETE .

9) Your TV will be restarted automatically.

Software Files are available from
the GSFS or GCSC web sites.

Summary of Contents for 32LD350








































































Search results

Summary of Contents for 32LD350

Reviews:

Related manuals for 32LD350

Brands by name

Popular brands

LG 32LD350, Troubleshooting Manual

Search results

Summary of Contents for 32LD350

Reviews:

Related manuals for 32LD350

Brands by name

Popular brands