background image

6

FEATURE OF THIS TV

INTRODUCTION

If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is noth-
ing wrong with TV.
Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they
have no adverse effect on the monitor's performance.
Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce
some temporary distortion effects on the screen.

On Disposal

a. The fluorescent lamp used in this product contains a small amount of mercury.
b. Do not dispose of this product with general household waste.
c. Disposal of this product must be carried out in accordance to the regulations of your local authority.

LG's own special digital image generator, consisting
of a full digital image processor, six different main
picture quality factors.

High-definition television. High-resolution digital
television broadcast and playback system composed
of roughly a million or more pixels, 16:9 aspect-ratio
screens, and AC3 digital audio. A subset of digital
television, HDTV formats include 1080i and 720p
resolutions.

With HDMI CEC support of LG’s audio/video device
connected to the HDMI (high-definition multimedia
interface), LG TV with this logo works easily with one
remote control. 

Manufactured under license from Dolby Laboratories.

Dolby

“and the double-D symbol are trademarks of

Dolby Laboratories.  

is a trademark of SRS Labs, Inc.

TruSurround XT technology is incorporated under
license from SRS Labs, Inc.

It has 2 HDMI ports that connect audio and video
devices with one cable and produces the highest
quality digital images and sound.

Summary of Contents for 32LC4D Series




























































































































Reviews: