LG 32LB3RS, Manual

Page: 11 / 37

- 11 -
(2) HDMI(256 Bytes )
O
BLOCK0(128BYTE)
O
BLOCK0(128BYTE)
=> Detail EDID Options are below (a, b, c, d, e)
a. Product ID
b. Serial No : Controlled on production line
c. Month, Year : Controlled on production line:
ex) Monthly : '03' => '03'
Year : '2005' => '0F'
d. Model Name/Monitor Name
e. Checksum: Changeable by total EDID data
5. ADC Calibration
* Caution : System control RS-232C Host should be “PC” for
adjustment
- Press the FRONT-AV KEY on R/C for converting input mode
(Change RS-232C Host : pc, Band Rate : 115200bps)
5.1. Adjustment of AV
* Required Equipments
O
Remote controller for adjustment
O
802F Pattern Generator, Master (MSPG-925FA), etc.
O
MSPG-925FA Pattern Generator (Which has Video
Signal: 100% Color Bar Pattern shown in Fig. 2)
=> Model : 202 / Pattern : 65 (PAL : CH)
Model : 207 / Pattern : 65 (NTSC-J)
(1) Method of Auto AV Color Balance
1) Press the FRONT-AV KEY on R/C for converting input
mode.
2) Input the Video Signal: 100% Color Bar signal into
AV2(MA/TA)
3) Set the PSM to Standard mode in the Picture menu.
4) Press INSTART key on R/C for adjustment.
5) Press the
G
(Vol.+) key to operate the set, then it
becomes automatically.
6) Auto-RGB OK means the adjustment is completed.
(2) Requirement
O
This AV color balance adjustment should be performed
before White Balance Adjustment.
5.2. Adjustment of Component.
* Required Equipments
O
Remote controller for adjustment
O
802F Pattern Generator, Master (MSPG-925FA), etc.
O
MSPG-925FA Pattern Generator
(Which has 720p@50Hz YPbPr signal : 100% Color Bar
Pattern shown in Fig. 2 )
=> Model: 215 / Pattern: 65
O
It is very import to use correct adjustment pattern like Fig.2.
- If Minimum Black Level and/or Maximum White Level
is not correct, Select 100% Color Bar Pattern.
(1) Method of Auto Component Color Balance
1) Input the Component 720p 100% Color Bar(MSPG-
925FA model:215, pattern:65) signal into Component.
(ZA : component , TA/MA : component 1 or 2)
2) Set the PSM to Standard mode in the Picture menu.
3) Press the INSTART key on R/C for adjustment.
4) Press the
G (Vol. +) key to operate the set , then it
becomes automatically.
5) Auto-RGB OK means the adjustment is completed.
Model Name Product ID Product ID
Dec Hex EDID table
32LB3RS-MB 30120(A) 30120 75A8 A875
30121(D) 30121 75A9 A975
MSPG-
925FA
AV ADC Condition
PAL NTSC
CH model:AV3 MA model:AV1
Model:202(PAL-BGDHI) Model:201(NTSC-J)
Pattern 65 * 100% Color Bar
Component
Model : 215
(720p@60Hz)
RGB
Model : 60
(1024x768
@60H)
Model Name
LGTV 00 00 00 FC 00 33 32 4C 42 33 52 53 2D 4D 41 0A 20 20
<Fig. 2>
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 00 FF FF FF FF FF FF 00 1E 6D a b
10 C 01 03 80 46 27 78 EA D9 B0 A3 57 49 9C 25
20 11 49 4B 81 00 80 31 40 01 01 01 01 45 40 01 01
30 61 40 01 01 01 01 1B 21 50 A0 51 00 1E 30 48 88
40 35 00 BC 88 21 00 00 1C 4E 1F 00 80 51 00 1E 30
50 40 80 37 00 BC 88 21 00 00 18 00 00 00 FC 00 4C
60 47 20 54 56 0A 20 20 20 20 20 20 20 d
70 D 01 e
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
80 02 03 23 F1 50 01 07 16 02 03 11 12 13 04 14 85
90 20 21 22 1F 10 23 09 07 07 83 01 00 00 65 03 0C
A0 00 20 00 01 1D 00 80 51 D0 1C 20 40 80 35 00 BC
B0 88 21 00 00 1E 8C 0A D0 8A 20 E0 2D 10 10 3E 96
C0 00 13 8E 21 00 00 18 8C 0A A0 14 51 F0 16 00 26
D0 7C 43 00 C4 8E 21 00 00 98 01 1D 80 18 71 1C 16
E0 20 58 2C 25 00 C4 8E 21 00 00 9E 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e