background image

Copyright©2009 LG Electronics.Inc. All right reserved.
Only for training and service purposes.

LGE Internal Use Only

- 9 -

8. FM TX MODEL(Option)

How to inspect condition of a transmission and reception in FM TRANSMITTER MODEL

(1) FM TRANSMITTER's efficiency inspections is executed to a finished in a final inspection phase. 
(2) FM TRANSMITTER is a function which receives voice-singal by an exclusive remote control 

and earphone, transmitts a FM through transmitter of inner part in MICOM BOADR to TV sound(MONITOR OUTPUT) 

(3) If the received frequency which set up in OSD is being tunned without using an exclusive remote control,

it is available to receive in a general FM receiver. 

1) Execute in channel generating voice-signal.
2) Select a transmitted frequency in MENU OSD.

MENU -> SOUND -> TRANSMITTER -> Select frequency(87.7MHZ)

3) A received frequency in an exclusive remote control or received FM Radio is tuned by 87.7MHz 

which is same as frequency in OSD. 

4) Check out whether a signal generating to MAIN SPEAKER generates in earphone or receiver or not.
5) There is no alternation and setting of adjusted DATA in the process of inspecting FM TX.

OPTION1

OPTION2

OPTION3

OPTION4

0 : 29” Slim, 1: 29” Flat, 2: 29” Normal, 3: 29” TS/AK

0: Other CPT, 1: TS-AK CPT

0: W/O SCR50,    1: W/SCR50

0: 1 TUNER,    1: 2TUNER

0 : W/O Video Mute,  1: W/ Video Mute

0 : W/O SIDE A/V,  1 : W/ SIDE A/V

0 : Standard,  1 : AV Multi System

0: RF stereo, 1:AV stereo, 2: Mono, 3: Mono Dual

0: No PIP, 1: 1 Tuner PIP, 2: 2 Tuner PIP, 3: Reserved

0: EU=>Low curve, 1: NON-EU=>High curve

DVD option

FM TX option

EYE option

4 Key option

TILT option

Degaussing option

CW62C Only 1 =>

Vol. Curve/S Mute timing/component compensation Value change

Refer to the next page. [Table 14]

Refer to the next page. [Table 14]

Not available

0 : Standard,  1 : HOTEL Mode

0 : Deep,  1 : Light

0 : W/O Turbo P/S,  1 : W/ Turbo P/S

CPT

SCREEN

SCR50

TUNER

V-MUTE

AV3

AV MULTI

SOUND

PIP

VOL CURVE (volume curve)

DVD

XWAVE

EYE

4KEY

TILT

DEGAUSS(Degaussing)

CW62C

OSD LANG

LANG INI

REMONCON

HOTEL

COLORTBL

TURBO P/S

MENU

FUNCTION

(Table 6) OPTION 1, 2, 3, 4

Summary of Contents for 29FU1RL























Reviews: