29
ENG
ENGLISH
EXTERNAL CONTROL DEVICE SETUP
18. Tune Command (Command: m a)
► Select channel to following physical number.
Data00 : High channel data
Data01 : Low channel data
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 8A (18AH),
DTV No. 0 -> Don’t care
Data02 : [Antena]
0x00 : Analog Main
0x10 : DTV Main
0x20 : Radio
[Cable]
0x80 : Analog Main
0x90 : DTV Main
0xA0 : Radio
Channel data range
Analogue - Min: 00 to Max: 63 (0 to 99)
Digital - Min: 00 to Max: 3E7 (0 to 999)
Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
Data Min: 00 to Max: 7DH
16. Auto Configure(Command: j u)
(Only RGB support model)
► To adjust picture position and minimize image shaking auto-
matically. It works only in RGB (PC) mode.
Data 01: To set
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
20. Key(Command: m c)
► To send IR remote key code.
Data Key code - See p. 23.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
19. Programme Add/Skip(Command: m b)
► To set skip status for the current Programme.
Data 00 : Skip 01 : Add
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
21. Control Back Light(Command: m g)
► To control the back light.
Data Min : 00 to Max : 64
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
17. Equalize(Command: j v)
► To adjust equalize.
MSB
LSB
Transmission [j][v][ ][Set ID][ ][Data][Cr]
Frequency
Data
0
0
0
0
0
0
0
0
Ack [v][ ][Set ID][ ][OK/NG][Data][x]
7 6 5 Frequency 4 3
2
1 0
Step
0 0 0
1’st Band
0 0
0
0 0
0(decimal)
0 0 1 2’nd Band 0 0
0
0 1
1(decimal)
0 1 0 3’rd Band ... ... ... ... ...
...
0 1 1 4’th Band
1 0
0
1 1 19(decimal)
1 0 0 5’th Band
1 0
1
0 0 20(decimal)
