4. After finishing deflection setting data adjustment, press ENTER
KEY,then save it and escape adjustment Mode.
Deflection Setting ITEM
1. V SLOPE
CPT center line aim at black background !
2. V SHIFT (VS)
Keep accord with vertical center line of received picture and
CPT
3. V LINEAR (VL)
Adjust the top & bottom size of inner circle to be equal on PAL
E05 CH.
4. V AMPLIT (V AMPITUDE)
PAL signal: Adjust upper and lower part of circle from the effective
screen of the CPT to be distance of 6~7mm .
5. H SHIFT (HS)
Adjust the vertical center line of a digital circle pattern is in accord
with geometric vertical center of the CPT.
6. EW WIDTH (EW)
Adjust outer line of the left/right outer lattice to be united with
effective boundary surface of CPT.
Adjust(1) of [Fig 4] 0~25% scope on external lattice from PAL
adjustment.
7. EW PARAB (EW PARABOLA)
Adjust so that middle portion of the outer most left and
right vertical line looks like parallel with vertical lines of the
CPT.
8. EW TRAPE (EW TRAPEZOID)
Keep accord with the top and the undersurface horizontal scope.
(When picture distorts,adjust until it is the square.)
9. EW UPCOR & EW LOCORR
Adjust so that corner vertical line of upper-left ,upper-right, lower-
left and lower-right to be optimization.
10. H BOW
Adjust until distortion scope of the edge part in the top and the
undersurface of the picture are the same.
11. H PARALL (ANGLE)
In angle adjustment, adjust until inclination of center vertical line
should be vertical precisely.
12. SCORRECT (S CORRECTION)
Adjust so that the lattice scopes of top, center, bottom of received
pattern are the same.
Use the default setting data (Initial data) of CPT owing to using DY
data of CPT.
13. V SCROLL
Keep accord with the geometry vertical center line of received
picture and the vertical center of CPT.
14. V ZOOM
VERTICAL ZOOM
15. WBR
16. WBF
3.5 Deflection setting default (SERVICE 2)
- P A L(SERVICE 2)
[Table 4] Deflection setting default based on different model
(SERVICE 2)
- 7 -
[Fig.5] Cross-Hatch Pattern (PAL:E-7 CH)
CRNU
CRNL
CRNU6
EP
CRNL6
Adjusting Point
Actual picture size
[fig.4] PAL Digital Pattern (EU05CH)
Copyright©2008 LG Electronics.Inc. All right reserved.
Only for training and service purposes.
LGE Internal Use Only
Summary of Contents for 25FB7RLE
Page 21: ... 2008 03 12 ...
Page 22: ...SVC SHEET EBY42399901 S ...
