7
ENGLISH
Connections (notifications)
Connect various external devices to the TV and switch input modes
to select an external device. For more information about an external
device’s connection, refer to the manual supplied with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio
systems, USB storage devices, PC, gaming devices, and other external
devices.
NOTE
y
The external device connection may differ from the model.
y
Connect external devices to the TV regardless of the order of the
TV port.
y
If you record a TV programme on a DVD recorder or VCR, make
sure to connect the TV signal input cable to the TV through a DVD
recorder or VCR. For more information of recording, refer to the
manual provided with the connected device.
y
Refer to the external equipment’s manual for operating
instructions.
y
If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
y
In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the [PICTURE]
menu until the picture is clear.
y
In PC mode, some resolution settings may not work properly
depending on the graphics card.
Antenna connection
Connect the TV to a wall antenna socket with an RF cable (75 Ω) (Not
Provided).
y
Use a signal splitter to use more than 2 TVs.
y
If the image quality is poor, install a signal amplifier properly to
improve the image quality.
y
If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
y
An antenna cable and converter are not supplied.
y
Supported DTV Audio : MPEG, Dolby Digital, Dolby Digital Plus,
HE-AAC
CAUTION
y
Must use the enclosed screw in the box. (Depending on model)
y
Disconnect the power first, and then move or install the TV.
Otherwise electric shock may occur.
y
If you install the TV on a ceiling or slanted wall, it may fall and
result in severe injury.
y
Use an authorized LG wall mount and contact the local dealer or
qualified personnel.
y
Do not over tighten the screws as this may cause damage to the TV
and void your warranty.
y
Use the screws and wall mounts that meet the VESA standard. Any
damages or injuries by misuse or using an improper accessory are
not covered by the warranty.
y
Screw length from outer surface of back cover should be under 8
mm.
Wall mount Pad
Back Cover
Standard screw
: M4 x L10
Wall mount Pad
Back Cover
Max.8 mm
NOTE
y
Use the screws that are listed on the VESA standard screw
specifications.
y
The wall mount kit includes an installation manual and necessary
parts.
y
The wall mount bracket is optional. You can obtain additional
accessories from your local dealer.
y
The length of screws may differ depending on the wall mount. Be
sure to use the proper length.
y
For more information, refer to the instructions supplied with the
wall mount.
Summary of Contents for 24TL520U
Page 2: ...P B P R P B P R ...
