23
ENGLISH
Stereo/Dual Reception
This feature may not be applied based on country broadcasting
circumstance. When a programme is selected, the sound information
for the station appears with the programme number and station
name. Press button to select the Multi Audio menu.
Broadcast
On Screen Display
Mono
Stereo
Dual
MONO
STEREO
DUAL I , DUAL II , DUAL I + II
NICAM
NICAM
y
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to
mono. In mono reception, the clarity of sound is improved.
y
Language selection for dual language broadcast
If a programme can be received in two languages (dual language),
you can switch to DUAL I, DUAL II or DUAL I+II.
DUAL I
Sends the primary broadcast language to the
loudspeakers.
DUAL I I
Sends the secondary broadcast language to the
loudspeakers.
DUAL I+I I
Sends a separate language to each loudspeaker.
Nicam Reception
If the TV is equipped with a receiver for NICAM reception, high quality
NICAM (Near Instantaneous Companding Audio Multiplex) digital
sound can be received. Sound output can be selected according to the
type of broadcast received.
1 When [NICAM] mono is received, you can select [NICAM MONO]
or [FM MONO].
2 When [NICAM] stereo is received, you can select [NICAM STEREO]
or [FM MONO].
If the stereo signal is weak, switch to [FM MONO].
3 When [NICAM] dual is received, you can select [NICAM DUAL I],
[NICAM DUAL II] or [NICAM DUAL I+II] or [FM MONO].
Speaker Sound Output Selection
(Depending on model)
In AV or HDMI mode, you can select output sound for the left and right
loudspeakers. Select the sound output.
L+R:
Audio signal from audio L input is sent to the left
loudspeaker and audio signal from audio R input is sent to
the right loudspeaker.
L+L:
Audio signal from audio L input is sent to left and right
loudspeakers.
R+R:
Audio signal from audio R input is sent to left and right
loudspeakers.
[TIME] Settings
[TIME] [Clock]
Sets the time.
[TIME] [Off Time]/[On Time]
Sets the time to turn on or off the TV automatically. To use this
function, you should set the current time and date in advance.
NOTE
y
If you do not press any button within 2 hours after the TV turns
on by the [On Time] feature, the TV enters the Standby mode
automatically.
y
If you set both [Off time] and [On time] features to the same time,
the [Off time] feature overrides the [On time] feature.
[TIME] [Sleep Timer]
Sets the length of time until the TV turns off. If you turn the TV off and
turn it on again, the [Sleep timer] feature will be set to [Off].
[TIME] [Auto Off(On Time)]
If [On Time] is enabled, the TV will be turned on at the specified time.
If you do not operate the TV for two hours, the TV will be turned off
automatically.
[TIME] [Automatic Standby]
(Depending on
model)
If you do not press any button on the TV or remote control for a certain
period, the TV will automatically switch to standby mode.
Summary of Contents for 24TL520A
Page 31: ...31 ENGLISH ...