7
ENGLISH
•
Use at least two people to move a large TV.
•
When transporting the TV by hand, hold the TV as
shown in the following illustration.
•
When transporting the TV, do not expose the TV to
jolts or excessive vibration.
•
When transporting the TV, keep the TV upright;
never turn the TV on its side or tilt towards the left
or right.
•
When handling the TV, be careful not to damage
the protruding buttons.
•
Avoid touching the screen at all times, as
this may result in damage to the screen.
•
Do not place the product on the floor with
its front facing down without padding.
Failure to do so may result in damage to
the screen.
•
Do not move the TV by holding the cable
holders, as the cable holders may break,
and injuries and damage to the TV may
occur. (Depending upon model)
•
When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
Mounting on a Table
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (4 inches) (minimum) space from
the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
(4 inches)
(Depending upon model)
2
Connect the power cord to a wall outlet.
•
Do not apply foreign substances (oils,
lubricants, etc.) to the screw parts when
assembling the product. (Doing so may
damage the product.)
•
If you install the TV on a stand, you need to
take actions to prevent the product from
overturning. Otherwise, the product may
fall over, which may cause injury.
•
Do not use any unapproved items to ensure
the safety and product life span.
•
Any damage or injuries caused by using
unapproved items are not covered by the
warranty.
•
Make sure that the screws are fastened
tightly. (If they are not fastened securely
enough, the TV may tilt forward after being
installed.)
•
Do not fasten the screws with excessive
force otherwise they may be worn out and
become loose.
