y
Handle the adapter carefully to avoid dropping or striking it. An
impact could damage the adapter.
y
Keep the product away from direct sunlight.
y
Never touch this apparatus or antenna during a lightning storm.
y
When mounting a TV on the wall, make sure not to install the TV
by hanging the power and signal cables on the back of the TV.
y
Do not allow an impact shock or any objects to fall into the
product, and do not drop anything onto the screen.
y
Disconnecting the Device from the Main Power
-
The power plug is the disconnecting device. In case of an
emergency, the power plug must remain readily accessible.
y
Make sure the power cord is connected securely to the power plug
on the TV.
y
Batteries
Store the accessories (battery, etc.) in a safe location out of the
reach of children.
y
This apparatus uses batteries. In your community there might be
regulations that require you to dispose of these batteries properly
due to environmental considerations. Please contact your local
authorities for disposal or recycling information.
y
Do not dispose of batteries in a fire.
y
Do not short circuit, disassemble, or allow the batteries to
overheat.
y
Do not use high voltage electrical equipment near the TV, (e.g., a
bug zapper).
This may result in product malfunction.
y
Dot Defect
-
The panel is a high technology product with resolution of two
million to six million pixels. In a very few cases, you could see
fine dots on the screen while you’re viewing the TV. Those dots
are deactivated pixels and do not affect the performance and
reliability of the TV.
y
Generated Sound
-
Cracking noise
A cracking noise that occurs when watching
or turning off the TV is generated by plastic thermal contraction
due to temperature and humidity. This noise is common for
products where thermal deformation is required.
-
Electrical circuit humming/panel buzzing
A low level noise is generated from a high-speed switching
circuit, which supplies a large amount of current to operate a
product. It varies depending upon the product. This generated
sound does not affect the performance and reliability of the
product.
y
Take care not to touch the ventilation openings. When watching
the TV for a long period, the ventilation openings may become
hot. This does not affect the performance of the product or cause
defects in the product.
y
Do not install this product on a wall if it could be exposed to oil or
oil mist. This may damage the product and cause it to fall.
y
If the TV feels cold to the touch, there may be a small flicker when
it is turned on. This is normal; there is nothing wrong with TV.
Some minute dot defects may be visible on the screen, appearing
as tiny red, green, or blue spots. However, they have no adverse
effect on the TV’s performance. Avoid touching the LCD screen or
holding your finger(s) against it for long periods of time. Doing so
may produce some temporary distortion effects on the screen.
y
Displaying a still image for a prolonged time may cause image
sticking. Avoid displaying a fixed image on the TV screen for a long
period of time.
6
ENGLISH
