Service
Unplug the monitor from the wall outlet and refer servicing to
qualified service personnel when:
y
The power cord or plug is damaged or frayed.
y
Liquid has been spilled into the monitor.
y
The monitor has been exposed to rain or water.
y
The monitor does not operate normally following the operating
instructions. Adjust only those controls that are covered in the
operating instructions. An improper adjustment of other controls
may result in damage and often requires extensive work by a
qualified technician to restore the monitor to normal operation.
y
The monitor has been dropped or the cabinet has been damaged.
y
The monitor exhibits a distinct change in performance.
y
Snapping or popping from the monitor is continuous or frequent
while the monitor is operating. It is normal for some monitors to
make occasional sounds when being turned on or off, or when
changing video modes.
Do not attempt to service the monitor yourself, as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
WARNING!
Never place a television set in an unstable location. A television set
may fall, causing serious personal injury or death. Many injuries,
particularly to children, can be avoided by taking simple precautions
such as:
y
Using cabinets or stands recommended by the manufacturer of
the television set.
y
Only using furniture that can safely support the television set.
y
Ensuring the television set is not overhanging the edge of the
supporting furniture.
y
Not placing the television set on tall furniture (for example,
cupboards or bookcases) without anchoring both the furniture and
the television set to a suitable support.
y
Not placing the television set on cloth or other materials that may
be located between the television set and supporting furniture.
y
Educating children about the dangers of climbing on furniture to
reach the television set or its controls.
If your existing television set is being retained and relocated, the
same considerations as above should be applied.
Symbols
Refers to alternating current (AC).
Refers to direct current (DC).
Refers to class II equipment.
Refers to stand-by.
Refers to “ON” (power).
Refers to dangerous voltage.
18
ENGLISH
