ENG
ENGLISH
4
Lifting and moving the TV
Please note the following advice to prevent the TV from being
scratched or damaged and for safe transportation regardless of its type
and size.
y
It is recommended to move the TV in the box or packing material
that the TV originally came in.
y
Before moving or lifting the TV, disconnect the power cord and all
cables.
y
When holding the TV, the screen should face away from you to avoid
damage.
y
Hold the top and bottom of the TV frame firmly. Make sure not to
hold the transparent part, speaker, or speaker grill area.
y
When transporting the TV, do not expose the TV to jolts or excessive
vibration.
y
When transporting the TV, keep the TV upright, never turn the TV on
its side or tilt towards the left or right.
y
Do not apply excessive pressure to cause flexing/bending of frame
chassis as it may damage screen.
CAUTION
y
Avoid touching the screen at all times, as this may result in damage
to the screen.
y
When handling the TV, be careful not to damage the protruding
joystick button. (Depending on model)
Setting up the TV
CAUTION
y
When attaching the stand to the TV set, place the screen facing
down on a cushioned table or flat surface to protect the screen from
scratches.
y
Do not carry the TV upside-down by holding the stand body (or
stand base) as this may cause it to fall off, resulting in damage or
injury.
y
Do not apply foreign substances (oils, lubricants, etc.) to the screw
parts when assembling the product. (Doing so may damage the
product.)
NOTE
y
Lift up the latch at the bottom of the stand base and detach the
stand base from the TV. (Only TK410*, TK41EV)
y
Remove the stand before installing the TV on a wall mount by
performing the stand attachment in reverse. (Only TK420*)
y
TK600 model does not require the additional assembly.
Summary of Contents for 22TK410D
Page 3: ...24 28TK41 22TK41 1 1 2 2 ...
Page 4: ...B A USB IN 5 V 0 5 A PCMCIA CARD SLOT A ...
Page 7: ...DC IN 19 V DC IN 19 V 2 2 3 3 4 1 1 1 2 ...
Page 8: ......
