LG 22LX330C-UA, Installation Manual

Page: 10 / 46

10
If ‘A/V Setting’ is changed from ‘No’ to ‘Yes’, parameters that are set before entering ‘Installation Menu’ are
applied whenever turn on power.
y y
Following Parameters are applied to basic.
y
» Picture section - PSM mode, Picture Data (Contrast, Brightness, Color, Sharpness, Tint)
y
» Sound section - SSM mode, Sound Data (Balance, Equalizer Data)
y
» AVL (Auto Volume Level) and Language, Teletext language, ARC Data. Except these,
other parameters are applied differently according to the TV-Set.
The aspect ratio determines the default aspect ratio that the set returns to on power up.
y y
The modes are as follows:
y
»
Aspect ratio = “Disabled(0)” stays at previous state, same as consumer model.
y
»
Aspect ratio = “Set by Program(1)”
y
»
Aspect ratio = “4:3 ratio (2)”
y
»
Aspect ratio = “16:9 ratio (3)”
y y
If enabled, upon power up the television reset the aspect ratio to the specified state regardless of
how the user has previously changed the aspect ratio.
(if "SetByProgram" is not supported, the television set the aspect ratio to "16:9".)
(8-5) A/V Setting
(8-6) Aspect ratio
y y
Available Input Source List
y y
Decide whether selected ‘Input Source’ is usable (Enable) or not (Disable).
y y
User cannot disable the current input’s ‘Aux Source Setting’.
(9-1) input Source
(9-2) Setting
The Auxiliary (Input) Source Setting feature will enable or disable for each external input. When ‘Aux Source
Setting’ is set to Yes(Work), the RJP or HDMI-CEC / HTNG will not operate.
(9) Aux Source Setting
Tune the selected start channel with physical or virtual method. Usually, digital channel uses virtual
channel and analog channel uses physical channel.
Select major part of start channel number if Input source value is TV. (in case of ATV, it means physical
channel number.)
Select minor part of start channel number if Input source value is TV.
(8-2) Tune Mode
(8-3) Major
(8-4) Minor