LG 22LK230, Service Manual

Page: 8 / 36

4) Read and write bin file.
Click “(1)Read” tab, and then load download file
(XXXX.bin) by clicking “Read”.
5) Click “(2)Auto” tab and set as below.
6) Click “(3)Run”.
7) After downloading, you can see the “4)Pass” message.
* If TV is Turn On, Check the updated SW Version and
Tool Option.
4.2. Input tool option.
Adjust tool option refer to the BOM.
- Tool Option Input : PCBA Check Process
- Area Option Input : Set Assembly Process
After Input Tool Option and AC off
Before PCBA check, you have to change the Tool option and
have to AC off/on (Plug out and in)
(If missing this process, set can operate abnormally)
(1) Profile : Must be changed the option value because being
different with some setting value depend on
module maker, inch and market.
(2) Equipment : Adjustment remote control
(3) Adjustment method
- The input methods are same as other chassis.(Use IN-
START key on the Adjustment remote control.)
(If not changed the option, the input menu can differ the
model spec.)
Refer to Job Expression of each main chassis assembly
(EBTxxxxxxxx) for Option value.
[Caution]
- Don’t Press “IN-STOP” key after completing the function
inspection.
- Don’t connect HDMI cable when downloading the EDID.
If the cables are connected, Downloading of EDID could
be failed.
4.3. EDID Data
- EDID D/L method: The EDID data is automatically saved.
* 22LK230
4.5. Check SW Version
(1) Method
1) Push In-star key on Adjustment remote control.
2) SW Version check
Check “Main : Vx.xx” - LK230
- 8 - LGE Internal Use Only Copyright © 2011 LG Electronics. Inc. All right reserved.
Only for training and service purposes
1
Filexxx.bin
1
Filexxx.bin
** HDMI : 256Bytes
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 0 FF FF FF FF FF FF 0 1E 6D 1 0 1 1 1 1
10 1 15 1 3 80 30 1B 78 0A F3 30 A4 54 46 96 26
20 0F 49 4B 20 0 0 1 1 1 1 1 1 1 1 1 1
30 1 1 1 1 1 1 1 1D 0 72 51 D0 1E 20 6E 28
40 55 0 E0 0E 11 0 0 1A 1 1D 0 BC 52 D0 1E 20
50 B8 28 55 40 E0 0E 11 0 0 1E 0 0 0 FD 0 31
60 3D 0F 2E 8 0 0A 20 20 20 20 20 20 0 0 0 FC
70 0 4C 47 20 54 56 0A 20 20 20 20 20 20 20 1 A2
80 2 3 1D 72 23 9 7 7 4A 6 7 15 16 2 3 11
90 12 84 93 83 1 0 0 65 3 0C 0 10 0 8C 0A D0
A0 8A 20 E0 2D 10 10 3E 96 0 E0 0E 11 0 0 18 8C
B0 0A A0 20 51 20 18 10 18 7E 23 0 E0 0E 11 0 0
C0 98 8C 0A D0 90 20 40 31 20 0C 40 55 0 E0 0E 11
D0 0 0 18 8C 0A A0 14 51 F0 16 0 26 7C 43 0 E0
E0 18 11 0 0 0 0 0 0 0 0 0 0 0 0 0 0
F0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 14