LG 22LH4530, Service Manual

Page: 12 / 26

- 12 - LGE Internal Use Only
Copyright © LG Electronics. Inc. All right reserved.
Only for training and service purposes
* When doing Adjustment, Please make circumstance as
below.
4.5. Model Name & SW Version & Adjust
check.
* Press the ‘Instart’ key of ADJ remote controll
4.5.1. Model Name& SW Version Check
1) Check ‘Model Name’.
2) Check ‘S/W Version’ (Refer to the IC Ver. in the BOM)
4.5.2. Adjust Check
1) Check ‘Country Group’
2) Check ‘Area Option’
3) Check ‘Tool Option’ (Refer to the BOM Comments)
4) Check ‘EDID[RGB&HDMI]’ is OK.
* After check all, Press the 'EXIT' key of ADJ remote controll
to go out SVC menu.
4.6. Outgoing condition Configuration
* After all function test., press IN-STOP Key by SVC Remote
controll. And make Outgoing Condition
4.7. Ship-out mode check (In-stop)
▪ After final inspection, if monitor is power only mode, In-stop
process is started automatically when PC is turned off by
command.
Check that the unit goes to Stand-by mode.
▪ For manual in-stop, press In-Stop key of the Adj. R/C and
check that the unit goes to Stand-by mode.
▪ In-stop time
- total required time : around 10 second.(Maximum 12
second)
; time to display “In-stop OSD” : 8 second.
; time to turn on RED LED : 2 second.