LG 20CAV37K Owner'S Manual Download Page 17

Page: 17 / 56

ENG

English

CUSTOMIZING SETTINGS

Press the desired button on the bottom of the Monitor set.

Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Select

EXIT

to leave the OSD menu.

Monitor set Buttons

Button

Description

Activates the main menu.

OSD Lock/Unlock

Functions

This function allow you to lock the current control settings, so

that they cannot be inadvertently changed.

Press and hold the MENU button for several seconds. Then

OSD of “OSD Lock” will appear. After that, user can select

lock or unlock by pressing left/right button.

If user selects the “Lock” icon by pressing the “OK” button,

the message “OSD Locked” will appear. Otherwise, “OSD

Unlocked” will appear. After selecting the “Lock”, If you want

to change to Unlock, you can push the “MENU” button for

several seconds. The message “OSD Unlocked” will appear.

VOL

Adjust the volume of the monitor.(only works in Cloud mode)/the left arrow key.

CLOUD

Disconnects the connection when the key is pressed for a few seconds while in Cloud

mode;the right arrow key.

AUTO

To adjust the monitor settings, press the AUTO button on the MONITOR SETUP OSD

menu (only supported for analog signal).

For optimal screen display, use the following resolution.

Optimal Resolution

20CAV37K : 1440 x 900

24CAV37K : 1920 x 1080

INPUT

Allows selection of the input signal.

If you connect the monitor to a computer using a D-SUB cable, select either the

CLOUD or D-SUB input signal.

The initial input signal is D-SUB.

EXIT

Exits the OSD menu.

(Power Button)

D-SUB Input: Power On/Off

CLOUD Input

Monitor Off: Press the power button once then the monitor will be turned off after 5

seconds.

CLOUD Off: Press the power button twice then the monitor and CLOUD connection

will be disabled.

CLOUD On: Press the power button.

Power Indicator

The power indicator stays white if the display is running

properly (On Mode). If the display is in Sleep Mode, the

power indicator blinks white.

Summary of Contents for 20CAV37K

























































Search results

Summary of Contents for 20CAV37K

Reviews:

Related manuals for 20CAV37K

Brands by name

Popular brands

LG 20CAV37K, Owner'S Manual

Search results

Summary of Contents for 20CAV37K

Reviews:

Related manuals for 20CAV37K

Brands by name

Popular brands